Crash entering sleep mode


  1. mpcrsc562
    Posts : 1,117
    Windows 7 Ultimate x64
       New #1

    Crash entering sleep mode


    The past few times I have tried to put my PC into sleep mode, I get a crash. The crash has been dxgkrnl.sys. To my knowledge, this has only been happening since I have added my third monitor to my Eyefinity setup. The third monitor uses a passive DisplayPort to VGA adapter. My guess is that something does't quite work right with the ATi drivers when entering sleep. Anyway...

    Would anyone adept in reading dumps kindly look thru and see what you can find?
      My Computer
    Quote Quote

  3. CarlTR6
    Posts : 11,990
    Windows 7 Ultimate 32 bit
       New #2

    This is just a wild guess, I am not really proficient at these analysis yet; but I'm learning. Have a look at this and see if it apples to your hardware setup.

    "STOP 0x0000003B" Stop error on a computer that is running Windows 7 or Windows Server 2008 R2 when you use some IEEE 1394 devices
      My Computer
    Quote Quote

  4. mpcrsc562
    Posts : 1,117
    Windows 7 Ultimate x64
    Thread Starter
       New #3

    Thanks Carl for the stab at it, but I don't have any 1394 devices within my system
      My Computer
    Quote Quote

  6. zigzag3143
    Posts : 28,845
    Win 8 Release candidate 8400
       New #4

    mpcrsc562 said:
    The past few times I have tried to put my PC into sleep mode, I get a crash. The crash has been dxgkrnl.sys. To my knowledge, this has only been happening since I have added my third monitor to my Eyefinity setup. The third monitor uses a passive DisplayPort to VGA adapter. My guess is that something does't quite work right with the ATi drivers when entering sleep. Anyway...

    Would anyone adept in reading dumps kindly look thru and see what you can find?

    HI and welcome

    These crashes were caused by many things. Because they were I have to think hardware. use these to see what it means and what to try. https://www.sevenforums.com/crash-loc...-what-try.html


    Several of these were caused by your video driver, others memory corruption, your USBhub, and cdd.dll. You need to follow the instructions and tell us the results

    Ken
    Code:
    BugCheck 3B, {c0000005, fffff880050a189c, fffff88008b0d740, 0}
Probably caused by : dxgkrnl.sys ( dxgkrnl!VIDPN_MGR::AddFunctionalPathToVidPnTopology+4e4 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck 3B, {c0000005, fffff880056f289c, fffff8800c2a6740, 0}
Probably caused by : dxgkrnl.sys ( dxgkrnl!VIDPN_MGR::AddFunctionalPathToVidPnTopology+4e4 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck 3B, {c0000005, fffff880056a589c, fffff8800ce6f740, 0}
Probably caused by : dxgkrnl.sys ( dxgkrnl!VIDPN_MGR::AddFunctionalPathToVidPnTopology+4e4 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck 1000007E, {ffffffffc0000005, fffff8800578f412, fffff880077f38b8, fffff880077f3120}
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_DEVICE::RemoveCommitment+22 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck D1, {ffffffff800e8011, 2, 0, fffff8800183ccf8}
Probably caused by : memory_corruption
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck FE, {8, 6, 6, fffffa8008d3f000}
Probably caused by : usbhub.sys ( usbhub!UsbhHubProcessChangeWorker+ec )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck FE, {8, 6, 6, fffffa80087ca000}
Probably caused by : usbhub.sys ( usbhub!UsbhHubProcessChangeWorker+ec )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck 50, {fffff900e6bdd7c0, 1, fffff960001b392e, 2}
Probably caused by : cdd.dll ( cdd!DrvBitBlt+1057 )
      My Computer
    Quote Quote

  7. mpcrsc562
    Posts : 1,117
    Windows 7 Ultimate x64
    Thread Starter
       New #5

    The crashes related to usbhub have not persisted as I removed the external 4-port hub that was connected.

    The memory corruption has not persisted and was caused when I set my ram to run at 1066mhz. This one was an easy one to resolve as I set the ram freq back to 800mhz.

    And, the 0x50 crash has not persisted either. WhoCrashed reported that it was caused by ahcix64.sys... I can't remember if I updated the controller, but no other problems with this one.

    As I stated in the first post, the dxgkrnl.sys crash only has happened after using the third monitor in Eyefinity while using the DisplayPort to VGA adapter. I guess I'll either pony up some money for the active DisplayPort to DVI adapter or just stop putting my pc to sleep.
      My Computer
    Quote Quote

  8. mpcrsc562
    Posts : 1,117
    Windows 7 Ultimate x64
    Thread Starter
       New #6

    Thanks Ken.

    I was trying to see if you could find more specific info than from what I had already found / assumed.
      My Computer
    Quote Quote

 

  Related Discussions
hai.. help needed.... i am having the exact problem as op.. when i press sleep button, screen goes black (as usual).. but fan, and other keyboard lights are still on... it just freezes... i have to force shutdown to again use my laptop... i am attaching the msinfo32.nfo, driverview.txt... ...
BSOD when entering Sleep mode
in BSOD Help and Support

My laptop crashes almost every time it attempts to enter sleep mode. When I close the lid or select sleep or hibernate from the start menu, the computer will hang, and it sounds like it is accessing the hard drive. The computer will not respond to any input other than holding down the power button...
Hi, I've had this problem intermittently on my laptop for the past 2 years however it has been occuring more often recently. Basically sometimes when I click the sleep button on Windows 7, the screen fades to black as usual. However the fan keeps running (sounds like when it's on full load) and...
Hello, often, when I want to put computer into sleep mode or sometimes when I restart it, procedure doesn't finish, display usually turns off, but computer is still running. The only option is to turn it off manually by holding power button. After restarting I have a lot of (15) errors in...
BSOD when entering sleep mode
in BSOD Help and Support

I am running Windows 7 Home Premium x64 (SP1). For the past few weeks every time I enter sleep mode I get the BSOD: 0x7E hiber_scsiport.sys. I have attached the BSOD files. Can anyone please help me fix this issue?
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 й Designer Media Ltd
All times are GMT -5. The time now is 20:35.
Find Us