Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: Seemingly Random BSODs

18 Jun 2010   #1

Windows 7 Pro 64-bit
 
 
Seemingly Random BSODs

I have just built this computer and now i'm getting random BSODs. These are all fresh components except of a recycled video card. I've installed all motherboard drivers except for jmicron jmb36x driver which causes problems with my CD-Drive.

Anyways these BSODs happen about 3 times a week, mostly when I'm not around.

One thing to note is i’m running my ram at 1333mhz freq rather than 1600mhz as this was the auto-setting for my AMD Phenom II 965, the timings for this speed are looser than the timings for 1600mhz according to SPD which I found odd.

Also on the Ripjaw's packaging it says "designed for core i5 or i7 CPUs" most people don't seem to have any problems running them with AMD however.

Here’s all I could find out about my error:

Code:
-
System
 
 
-
Provider
 
[ Name] 
Microsoft-Windows-Kernel-Power
 
[ Guid] 
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
 
 
EventID
41
 
 
Version
2
 
 
Level
1
 
 
Task
63
 
 
Opcode
0
 
 
Keywords
0x8000000000000002
 
 
-
TimeCreated
 
[ SystemTime] 
2010-06-18T08:09:44.359217200Z
 
 
EventRecordID
83489
 
 
Correlation
 
 
-
Execution
 
[ ProcessID] 
4
 
[ ThreadID] 
8
 
 
Channel
System
 
 
 
-
Security
 
[ UserID] 
S-1-5-18
-
EventData
 
 
BugcheckCode
10
 
 
BugcheckParameter1
0xfffff88003b56000
 
 
BugcheckParameter2
0x2
 
 
BugcheckParameter3
0x1
 
 
BugcheckParameter4
0xfffff80003807e8d
 
 
SleepInProgress
false
 
 
PowerButtonTimestamp
0
Any help or advice is greatly appreciated.

My System SpecsSystem Spec
.

18 Jun 2010   #2

Microsoft Window 7 Professional 32 bit
 
 

Hi Albeshweegee and welcome to SF

Can you please upload your minidump in the next posts, that would help us a lot
http://www.sevenforums.com/crash-loc...d-problem.html

Regard
Tuan
My System SpecsSystem Spec
18 Jun 2010   #3

Windows 7 Pro 64-bit
 
 

Hi ttran, thanks for the link.

I've added the minidumps in my original post.
My System SpecsSystem Spec
.


18 Jun 2010   #4

Microsoft Window 7 Professional 32 bit
 
 

Hi there

Are you using any virtual Cd program such as Daemon tool or Alcohol 120%, sptd.sys, which belong to many virtual cd program, caused one of the BSODs
Code:
BugCheck A, {fffff88003b56000, 2, 1, fffff80003807e8d}
Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
Probably caused by : sptd.sys ( sptd+424ce )
Followup: MachineOwner
---------
I'm looking for the sptd.sys removable tool that you can use to remove sptd.sys file after removing those virtual cd program, will post it in just a minute
My System SpecsSystem Spec
18 Jun 2010   #5

Microsoft Window 7 Professional 32 bit
 
 

Here you go:
DuplexSecure - Downloads

Good Luck
Tuan
My System SpecsSystem Spec
18 Jun 2010   #6

Windows 7 Pro 64-bit
 
 

Ok thanks, I'll try that and see if that fixes the problem.
My System SpecsSystem Spec
18 Jun 2010   #7

Microsoft Window 7 Professional 32 bit
 
 

Yes, I hope that can fix your problem, I have seen deamon tool cause bsods many times (even me lol)
Hope it's all about

Regard
Tuan

You have this old driver, please update them if you have time
AF15BDA.sys, belong to DigitalNow TinyTwin DVB-T Receiver
Code:
AF15BDA  AF15BDA.sys  Tue Apr 29 15:34:37 2008 (4816DD9D)
My System SpecsSystem Spec
18 Jun 2010   #8

Windows 7 Pro 64-bit
 
 

Just BSODed again, this time was I playing a game and the screen went crazy, then blue screen showed up with irql_not_less_or_equal message. Which is apparently due to a bad driver of some sort (google), however I installed all my drivers and programs on day one, so it makes it hard to figure out whats going wrong.

I wonder if this is a hardware problem, I don't think it is my graphics card as this was working fine in my last computer (unless it was damaged while moving).

Also with regard to the DVB-T reciever windows tells me my driver is up to date. Minidump included.

My Gpu reaches temps of up to 65 degrees while under load, I think this is normal though.

Hope somebody can clear up the confusion.
My System SpecsSystem Spec
18 Jun 2010   #9

Microsoft Window 7 Professional 32 bit
 
 

Hi there
sptd.sys deamon tool issue now gone away-->congratulation
The bugcheck of the minidump file above indicate a system file, which is usbport.sys. Are you playing counter-strike (half-life), how do you play it? I mean are you playing it on usb?

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\TUANTR~1\AppData\Local\Temp\Rar$DI00.837\061910-17050-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*e:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`0324e000 PsLoadedModuleList = 0xfffff800`0348be50
Debug session time: Fri Jun 18 19:24:16.066 2010 (UTC + 7:00)
System Uptime: 0 days 1:10:41.783
Loading Kernel Symbols
...............................................................
................................................................
.....................................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck A, {fffff88006312ff8, 2, 1, fffff8000322202e}
Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f )
Followup: MachineOwner
---------
3: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffff88006312ff8, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
 bit 0 : value 0 = read operation, 1 = write operation
 bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000322202e, address which referenced memory
Debugging Details:
------------------

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800034f60e0
 fffff88006312ff8 
CURRENT_IRQL:  2
FAULTING_IP: 
hal!memcpy+25e
fffff800`0322202e 48894118        mov     qword ptr [rcx+18h],rax
CUSTOMER_CRASH_COUNT:  1
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xA
PROCESS_NAME:  hl.exe
TRAP_FRAME:  fffff880009b0a10 -- (.trap 0xfffff880009b0a10)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=bffea381de92627b rbx=0000000000000000 rcx=fffff88006312fe0
rdx=fffffffffee21000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8000322202e rsp=fffff880009b0ba8 rbp=0000000000000002
 r8=0000000000001000  r9=0000000000000080 r10=2217b71db0aa55b9
r11=fffff88006312000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
hal!memcpy+0x25e:
fffff800`0322202e 48894118        mov     qword ptr [rcx+18h],rax ds:fffff880`06312ff8=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER:  from fffff800032bdb69 to fffff800032be600
STACK_TEXT:  
fffff880`009b08c8 fffff800`032bdb69 : 00000000`0000000a fffff880`06312ff8 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`009b08d0 fffff800`032bc7e0 : 00000000`00000005 fffff880`06312000 fffffa80`05f8ff60 fffff880`0481b7a0 : nt!KiBugCheckDispatch+0x69
fffff880`009b0a10 fffff800`0322202e : fffff800`03207e15 fffff880`06311e40 00000000`00000002 fffffa80`07487e00 : nt!KiPageFault+0x260
fffff880`009b0ba8 fffff800`03207e15 : fffff880`06311e40 00000000`00000002 fffffa80`07487e00 fffff880`048991b1 : hal!memcpy+0x25e
fffff880`009b0bb0 fffff800`0320769a : fffffa80`054e4040 00000000`00000100 fffffa80`056d1660 00000000`0000fdd0 : hal!HalpDmaSyncMapBuffers+0x1bd
fffff880`009b0c60 fffff800`0320a83f : fffffa80`054e4040 fffff880`06311e40 fffffa80`056d1660 00000000`0000ff90 : hal!HalpDmaFlushScatterTransfer+0xae
fffff880`009b0cb0 fffff800`032097d5 : fffffa80`044a6a40 fffff880`06311e40 00000000`0000ff90 fffffa80`07487e00 : hal!IoFlushAdapterBuffers+0xaf
fffff880`009b0cf0 fffff880`04013023 : fffffa80`0545e1a0 fffffa80`0681e510 fffffa80`0545e050 fffffa80`0545e1a0 : hal!HalPutScatterGatherList+0x85
fffff880`009b0d50 fffff880`04013ab7 : 00000000`00000000 fffffa80`04122d80 fffffa80`0545ea02 00000000`00000002 : USBPORT!USBPORT_Core_iCompleteDoneTransfer+0x45f
fffff880`009b0e30 fffff880`0401164f : fffffa80`0545eea8 fffffa80`0545e1a0 fffffa80`0545f040 00000000`00000000 : USBPORT!USBPORT_Core_iIrpCsqCompleteDoneTransfer+0x3a7
fffff880`009b0e90 fffff880`04002f89 : fffffa80`0545e050 00000000`00000000 fffffa80`0545ee02 fffffa80`0545eea8 : USBPORT!USBPORT_Core_UsbIocDpc_Worker+0xf3
fffff880`009b0ed0 fffff800`032c9cdc : fffff880`02dd3180 fffffa80`0545eea8 fffffa80`0545eec0 00000000`00000000 : USBPORT!USBPORT_Xdpc_Worker+0x1d9
fffff880`009b0f00 fffff800`032c4765 : 000004d8`00000000 fffffa80`073ab770 00000000`00000000 fffff880`04002db0 : nt!KiRetireDpcList+0x1bc
fffff880`009b0fb0 fffff800`032c457c : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KyRetireDpcList+0x5
fffff880`0a589be0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDispatchInterruptContinue

STACK_COMMAND:  kb
FOLLOWUP_IP: 
USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f
fffff880`04013023 4533c0          xor     r8d,r8d
SYMBOL_STACK_INDEX:  8
SYMBOL_NAME:  USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f
FOLLOWUP_NAME:  MachineOwner
MODULE_NAME: USBPORT
IMAGE_NAME:  USBPORT.SYS
DEBUG_FLR_IMAGE_TIMESTAMP:  4a5bcc07
FAILURE_BUCKET_ID:  X64_0xA_USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f
BUCKET_ID:  X64_0xA_USBPORT!USBPORT_Core_iCompleteDoneTransfer+45f
Followup: MachineOwner
---------
Please run system file check to see if everything is ok
Start-->type cmd in search and run as administrator-->in cmd command window type in sfc /scannow (space between sfc and /)

Also, please read article which List of the latest USB hotfixes for each Windows version including Window 7 RTM (if this is the version you are using)
List of the latest USB hotfixes for each Windows version - Microsoft Windows USB Core Team Blog - Site Home - MSDN Blogs

Regard

Tuan
My System SpecsSystem Spec
18 Jun 2010   #10

Windows 7 Pro 64-bit
 
 

I was indeed playing counterstrike, this was off harddrive however, the only usb connections active would have been bluetooth adapter, TV tuner, keyboard and mouse. Will run the disk check ASAP.
My System SpecsSystem Spec
Reply

 Seemingly Random BSODs





Thread Tools



Similar help and support threads for2: Seemingly Random BSODs
Thread Forum
Seemingly random BSODs BSOD Help and Support
Solved Seemingly random BSODs and freezes BSOD Help and Support
BSODs (at seemingly random moments) BSOD Help and Support
Seemingly random BSODs BSOD Help and Support
Been having seemingly random BSODs BSOD Help and Support
Seemingly random BSODs? BSOD Help and Support
Regular but seemingly random BSODs, please help? BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:43 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33