Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD Crash after logging in.

21 Jun 2010   #11

Windows 7 Ultimate 64-bit (6.1 build 7600)

Having alot of problems tracking down a "windows 7 ATK 0110" driver.
The only thing i've been able to read upon so far is that, mentioned on the asus forums for my motherboard.. the M2N-Sli Deluxe.
That the Windows Vista 64bit driver can be used because apparently that board is not supported by Windows 7!?

My System SpecsSystem Spec
21 Jun 2010   #12

Windows 7 Ultimate 64-bit (6.1 build 7600)

OK According to Device Manager my current version that i just installed from the Vista 64bit package for the ATK0110 driver from the asus website for my M2N-Sli Deluxe board is as follows.

Driver Date: 16/07/2009
Driver Version: 1043.6.0.0

Now if anyone knows of a newer more updated driver, please let me know.
I'm gonna monitor this from this second on, as soon as i get another BSOD relating to a 0x3b or 0x1e i'm gonna scream!
My System SpecsSystem Spec
21 Jun 2010   #13

Windows 7 Ultimate 64-bit (6.1 build 7600)

Time to scream starts now..

Just installed the drivers for the nForce chipset 15.53 from the nvidia website, latest drivers for my board which included the ethernet driver and storage driver..
That part went fine, got to the 2nd part "would you like to install the nvidia network access manager" ... Sure why not?!?!

Minidump attatched
My System SpecsSystem Spec

21 Jun 2010   #14

Microsoft Window 7 Professional 32 bit

is the computer ok now? is there any BSODs occur after the one you posted?
My System SpecsSystem Spec
22 Jun 2010   #15

Windows 7 Ultimate 64-bit (6.1 build 7600)

Not since my last post there hasn't been.

I'm not entirely sure if the nforce drivers i installed were completed correctly or not, because usually when a BSOD occurs, anything you've done in that session is usually lost.
My System SpecsSystem Spec
22 Jun 2010   #16

Windows 7 x64, Windows XP SP3, Fedora


If you get more BSODs try driver verifier

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
My System SpecsSystem Spec
22 Jun 2010   #17

Windows 7 Ultimate 64-bit (6.1 build 7600)

Yeah its still happening unfortunately..
its 99% of the time the 0x3b error.
My System SpecsSystem Spec
22 Jun 2010   #18

Windows 7 Professional x64

Please follow reventon's instructions above for enabling Driver Verifier.
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Jonathan\Desktop\062310-28423-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*
Executable search path is: 
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02c09000 PsLoadedModuleList = 0xfffff800`02e46e50
Debug session time: Tue Jun 22 18:16:54.787 2010 (UTC - 4:00)
System Uptime: 0 days 0:09:01.893
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff80002ef0795, fffff8800b18c840, 0}

Probably caused by : ntkrnlmp.exe ( nt!HvpFindFreeCellInThisViewWindow+45 )

Followup: MachineOwner

1: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

An exception happened while executing a system service routine.
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002ef0795, Address of the instruction which caused the bugcheck
Arg3: fffff8800b18c840, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

fffff800`02ef0795 418b840ca8000000 mov     eax,dword ptr [r12+rcx+0A8h]

CONTEXT:  fffff8800b18c840 -- (.cxr 0xfffff8800b18c840)
rax=0000000001bc7000 rbx=0000000001bc7000 rcx=fffff8a000b9d010
rdx=0000000000000002 rsi=0000000000000000 rdi=fffff8a000b9d010
rip=fffff80002ef0795 rsp=fffff8800b18d210 rbp=0000000000000000
 r8=0000000000000018  r9=0000000000000000 r10=0000000001bc8000
r11=0000000000000006 r12=ffed7c1b65470e00 r13=fffff8a000b9d010
r14=0000000001bc8000 r15=0000000000000000
iopl=0         nv up ei pl nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010206
fffff800`02ef0795 418b840ca8000000 mov     eax,dword ptr [r12+rcx+0A8h] ds:002b:ffed74bb`6600deb8=????????
Resetting default scope




PROCESS_NAME:  SearchIndexer.


LAST_CONTROL_TRANSFER:  from 0000000000000000 to fffff80002ef0795

fffff880`0b18d210 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!HvpFindFreeCellInThisViewWindow+0x45

fffff800`02ef0795 418b840ca8000000 mov     eax,dword ptr [r12+rcx+0A8h]


SYMBOL_NAME:  nt!HvpFindFreeCellInThisViewWindow+45

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  ntkrnlmp.exe


STACK_COMMAND:  .cxr 0xfffff8800b18c840 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_nt!HvpFindFreeCellInThisViewWindow+45

BUCKET_ID:  X64_0x3B_nt!HvpFindFreeCellInThisViewWindow+45

Followup: MachineOwner
My System SpecsSystem Spec
22 Jun 2010   #19

Windows 7 Ultimate 64-bit (6.1 build 7600)

So i'm guessing what this driver verifier does is basically flag the driver at fault of causing the actual BSOD.

I thought that was supposed to be mentioned in the minidump it takes?

Question remains, is if the driver thats at fault has been updated to the most recent driver yet the BSOD continues, it would most likely have to be a direct hardware failure?
My System SpecsSystem Spec
22 Jun 2010   #20

Windows 7 Professional x64

New drivers can be buggy, and old ones can be buggy and incompatible. Sadly, newer isn't always better. I often tell people that the latest nVidia drivers for my card have issues, and the September drivers Windows Update finds work best.

Driver Verifier strains the drivers, and hopefully flags the correct one in the dump.
My System SpecsSystem Spec

 BSOD Crash after logging in.

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
BSOD after logging in normally. NO BSOD in safe mode. Error 0x0000001e
I'm trying to fix my friends Inspiron that has the BSOD. He's been getting it since November and did not know what it was so he just ignored it and kept rebooting it until the message happened to not show up. You can go into Safe Mode perfectly fine with no BSOD. Unfortunately I have no idea what...
BSOD Help and Support
system hangs after logging off and logging back!
hi! I logged off and logged back in.My system displays a black screen and doesn't log back in.It freezes and doesn't log back in. Help would be appreciated. mahesh
Performance & Maintenance
BSOD while logging in
Hi, I just installed Windows 7 Profesionnal 32 bits and I had the "Missing boot mgr". I managed to fix it but when I enter my password, it says welcome but spins around then I see a quick bsod before the computer restarts.
BSOD Help and Support
BSOD when logging in...
Hi, Brand new 64bit computer (2months old) I keep crashing when Logging in on normal mode. I could access in safe mode mode. I would be really grateful if anybody could help. attached .dmp in .zip file. Thank you.
BSOD Help and Support
BSOD when logging in
Well lets start from the beginning, i was browsing the web suddenly my anti virus said it detected a virus and a seperate windows command prompt pop up asking me to do something i dont remember. I clicked yes and it turned off my comp, then it kept going to "windows is loading files" and asking me...
BSOD Help and Support
BSOD when logging in
Hi there, I am helping a friend with his laptop and was looking for some advice please. The computer is booting up fine, but when we try and log him in it crashes and reboots. I have tried restarting it in safe mode, and have devirused it, but still cannot log on. The BSOD is only...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:36.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App