Windows 7: Changed PCU Speed , now my Desktop won't Load

I changed my PCU Speed, and now my monitor is just black, and my Desktop is on but won't load !!!!!!!!!!!!!!

Do a system restore, and be careful mucking around with speed settings, unless you know exactly what you are doing...

i cant because the screen wont load !

you'll need to go back into your bios, and undo all your overclock settings.

if you can't get into your bios, you'll need to open up your computer case, and find out how to reset to default - there's sometimes a switch, or a jumper you need to move. or just find the mobo battery (flat watch-type battery), take it out for a few minutes, then stick it back in.

hopefully you haven't fried your cpu...

How do i find the default ?

your motherboard will know, once it's reset. some bioses have a 'reset to default' option.

(what is the plural of bios? )

do you have a motherboard manual? - somewhere in there it will tell you how to reset.

or try the battery trick.

Sorry , how do i reset/

this method should work for all machines:

turn off your pc, but keep it plugged in.

open up your computer case.

look for a flat watch-type battery somewhere on the board.

take it out, and try not to handle it too much, coz you can weaken the charge. you may need tweezers or some long poky thing.

leave it out for a few minutes.

pray to your favourite deity. (is there a god of computers?)

stick battery back in.

cross fingers.

restart the machine.

smile if it all works fine again.

send £50 to mickey megabyte, devon.

if it doesn't boot, try taking out battery for a longer time.



post back here to let us know how it turned out.

Thank you mickey megabyte i love you

your £50 is in the post hahahahahaha :d

phew!