Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Constant bsod

11 Jul 2010   #1
diabolikkk

windows 7 professional
 
 
Constant bsod

I built a computer with this specs:
mobo- asus m4a79t
cpu- phemon ii x4 945
video-pny gts 250 1gb
ram- 2 gb x 1 ddr3 1333

and it was good for 2 days, then after i turn it on before win7 loaded it crashes, the only way i can get it to work is changing the ram place, but that's everyday. , and got worst when i updated win7.

please help.

i uploaded my minidump.


My System SpecsSystem Spec
.
11 Jul 2010   #2
usasma
Microsoft MVP

 
 

There is one Driver Verifier Enabled Minidump mixed in amongst all the other "regular" minidumps.
Have you turned Driver Verifier off? If not, please do so immediately!

The Driver Verifier dump blames AsIO.sys - a component of the Asus AISuite or PCProbe software. I would suggest uninstalling the software as it's not necessary for proper functioning of your system. Then, go to C:\Windows\System32\drivers and check to make sure that AsIO.sys is gone. If not, rename it to AsIO.BAK

Because of the large number of Memory Management and other memory related errors, I'd also suggest that you run this free memory diagnostic: Memory Diagnostics (read the details at the link)

Also, please remove or update these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall OR remove:
Quote:
How To Find Drivers:
- I have listed links to most of the drivers in the code box below. Please use the links there to see what info I've found about those drivers.
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.
- - The most common drivers are listed on this page: Driver Reference
- - Driver manufacturer links are on this page: http://www.carrona.org/drvrdown.html

Here's the older drivers (You can look them up here: Driver Reference ).
Please pay particular attention to any dated 2008 or earlier:
Code:
AsIO.sys     Mon Dec 17 04:10:20 2007 - Asus PCProbe Utility - http://www.carrona.org/dvrref.html#AsIO.sys
Dyncal.sys   Wed Nov 07 06:15:43 2007 - Padix/Ruling Technologies dynamic calibration driver - http://www.carrona.org/dvrref.html#Dyncal.sys
BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Sun Jul 11 15:03:57.589 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:42.321
BUGCHECK_STR:  0x1a_41284
PROCESS_NAME:  nvSCPAPISvr.ex
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Sat Jul 10 19:40:38.666 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:25.008
BUGCHECK_STR:  0x1a_41284
PROCESS_NAME:  svchost.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Fri Jul  9 19:53:09.477 2010 (UTC - 4:00)
System Uptime: 0 days 0:02:40.819
*** ERROR: Module load completed but symbols could not be loaded for AsIO.sys
BUGCHECK_STR:  0xc4_f6
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME:  UpdateChecker.
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Fri Jul  9 17:51:54.974 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:26.691
BugCheck 1000008E, {c0000005, 82b62067, 932fd6bc, 0}
Probably caused by : fileinfo.sys ( fileinfo!FIStreamLog+6f )
BUGCHECK_STR:  0x8E
PROCESS_NAME:  svchost.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Fri Jul  9 17:48:48.260 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:24.602
BugCheck 1000008E, {c0000005, 82cb4d06, 94b51bb4, 0}
Probably caused by : ntkrpamp.exe ( nt!CmpCloseKeyObject+bf )
BUGCHECK_STR:  0x8E
PROCESS_NAME:  spoolsv.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Thu Jul  8 22:33:59.959 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:26.676
*** WARNING: Unable to verify timestamp for Unknown_Module_598f2a40
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_598f2a40
BUGCHECK_STR:  0x1a_41201
PROCESS_NAME:  spoolsv.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Wed Jul  7 18:12:17.776 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:24.119
BUGCHECK_STR:  0x1a_41790
PROCESS_NAME:  explorer.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Mon Jul  5 22:10:47.051 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:28.393
BUGCHECK_STR:  0x19_20
PROCESS_NAME:  System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
  
  
 
My System SpecsSystem Spec
11 Jul 2010   #3
diabolikkk

windows 7 professional
 
 

thanks.. im starting to work on this right away. ill feedback asap.!!!
My System SpecsSystem Spec
.

11 Jul 2010   #4
diabolikkk

windows 7 professional
 
 

hi again...! ran the memory test and had no errors at all. somehow i cant find dyncal.sys driver, and how i install this one? thanks
My System SpecsSystem Spec
12 Jul 2010   #5
usasma
Microsoft MVP

 
 

I would suggest going to C:\Windows\System32\drivers and renaming dyncal.sys to dyncal.BAK
Then reboot to be sure it isn't loaded.
My System SpecsSystem Spec
Reply

 Constant bsod




Thread Tools




Similar help and support threads
Thread Forum
[BSOD] laptop constant random bsod's (IRQL_NOT_LESS_OR_EQUAL)
Laptop brand: Acer Model: Aspire 5560-sb653 OS: Windows 7 Home 64 bit Problem: Started 2 days ago. I was checking my email using Firefox and a "Display driver stopped working/ successfully recovered" message popped up, followed by first BSOD. After that, BSOD appeared at start-up. Tried...
BSOD Help and Support
bsod constant errors, restarting ,multiple bsod
pls solve and send me the solution to this .i have been experiencing this since i bought my pc since a long time.
BSOD Help and Support
Constant BSOD.
Hey there, I've been getting constant crashes and BSOD.. I've managed to get on, and get the dump. Any help would be appreciated. Thank you!
BSOD Help and Support
Constant Crashing, constant BSOD's
Alright, so the situation has gotten worse, a few weeks back I made a thread and someone advised me to remove Daemon/Alcohol 120 and then remove the leftovers using a specific tool, and it seemed to be fine for a while, but now my computer is starting to crash full force. I was just playing...
BSOD Help and Support
COnstant BSOD's
Ok let me start by saying ty for any help provided I built this system 6 months ago, and I did not have any problems with it until recently. The problems started after I did a format and reinstalled windows 7 about 4 weeks ago. The computer BSOD's randomly even if it is just sitting there...
BSOD Help and Support
Constant BSOD
Hi, Ive built a system up by myself and have had intermittent BSODs since ive started it up. I replaced the wireless adaptor card and things seemed to calm down. I would get a BSOD rarely, but not enough to worry. Ive recently uninstalled Norton Antivirus which came with one of the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 09:28.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App