Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSODs every day... need help

12 Jul 2010   #1
fatusi

win7 ultimate 32 bit
 
 
BSODs every day... need help

Hi guys,

i have a serious problem with my new config... i built it 2 weeks ago, and since then i get the BSODs almost every day.
i run memtest on both RAMs, individually both were OK, but when tried to run the test on dual, the system crashed after few seconds.
checkdisk showed no problems on the harddrive
today i tried to run SFC/scannow, but it stopped at 17%, and the program said: "windows resource protection could not perform the requested operation"
and btw the everest says as a video debug: YOU HAVE NOT CONNECTED ONE OF YOUR VIDEO CARD POWER CONNECTORS TO THE POWER SUPPLY....

i attached the minidumps and the sfc problem details file.

Any ideas?

Your help will be highly appreciated, please help me!

Thank you in advance!


My System SpecsSystem Spec
.
12 Jul 2010   #2
Jonathan_King

Windows 7 Professional x64
 
 

Welcome to SF!

It appears you are using the Windows 7 Beta. Are you using a crack to make it still work after the expiration period?

The Betas and Release Candidate have expired. Please buy a copy of Windows 7 from a reputable source, and do a clean install.

Do not try to upgrade, just reformat and do a clean install.

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Jonathan\_jcgriff2_\dbug\__Kernel__\070210-13026-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7100 MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7100.0.x86fre.winmain_win7rc.090421-1700
Machine Name:
Kernel base = 0x8283e000 PsLoadedModuleList = 0x82986810
Debug session time: Fri Jul  2 16:37:32.204 2010 (UTC - 4:00)
System Uptime: 0 days 0:04:20.437
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
...............................................................
................................................................
....................
Loading User Symbols
Loading unloaded module list
....
Unable to load image \SystemRoot\System32\win32k.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000008E, {c0000005, 828732f9, 9dd61ae8, 0}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
Probably caused by : win32k.sys ( win32k+d70f0 )

Followup: MachineOwner
---------
My System SpecsSystem Spec
12 Jul 2010   #3
Jonathan_King

Windows 7 Professional x64
 
 

One other thing, you should consider buying the 64-bit version of Windows 7. It should perform better than the 32-bit version, and allow you to use your full 4GB of RAM.
My System SpecsSystem Spec
.

Reply

 BSODs every day... need help




Thread Tools




Similar help and support threads
Thread Forum
Please help me with my BSODs
I experience BSODs every time my laptop is plugged in. But no BSODs happen when I'm not plugged in. Please help me on what I need to do. Here are my laptop's specs: Asus K42jC-vx169 Core i5 M460 2.53GHz 2Gb Ram 320Gb HDD 1gb VRAM (Nvidia GeForce CUDA 310M) Windows 7 ultimate 64-bit
BSOD Help and Support
And Still More BSODs
Sorry in my last post I said I changed CPU when I actually meant Motherboard. After changing my motherboard and running memtest ver. 4.0 I would usually end up with 1 mil errors for every ram in every slot. Same problem happened to my last motherboard which was the same model. Whenever I run...
BSOD Help and Support
Bsods
Hello windows 7 forums, my pc is once again plagued by the dreaded bsod and I need help please. I have been encountering different random errors ranging from a bad pool header, to a memory management error and a bccode:e1 error. I have no idea on what to do to fix this. They all pop up randomly, so...
BSOD Help and Support
BSODs, lots of BSODS
Hi, The blue screen of death are coming with win32k.sys, at first then irql_not_less_or_equal. I have win7 64 bit, clean installed like 1 year or so back. The dell hardware I bought was almost 2 years back but was fully replaced, motherboard, cpu except hardrive 6 months back. It is...
BSOD Help and Support
BSODs in Win 7 pro
Hello, I'm running W7 Pro, and have been having problems with BSODs. I recently purchased a powered usb hub, and on three separate occasions, I received a BSOD error related to the USB. I can't remember exactly what the error was, as the computer's activity log notes the crash, but not the...
BSOD Help and Support
BSODs on win 7 x64
I recently upgraded to win 7 and iv been getting random BSODs. the reason I decided to upgrade was because I started to get some BSODs on vista x64. I have a feeling it could be related to my wireless adapter (ZYXEL G202) drivers. I have attached the latest BSOD minidump files. Could somebody...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App