What annoys you?

Britton30 said:

M1GU31 said:

stuff not going how i want it to like when i took off the sata cable it took the L shaped plastic with it but still has the pins so now i need to find someone who knows how to fix that because i don't p.s. happened yesterday im resorted to useing older pc atm till i fix that :/

did you break the cable end or part of it is left in the drive? Or motherboard.

the l shaped platic on the drive but all the pins are still there. The piece of plastic got stuck inside the sata cord.

ICit2lol said:

M1GU31 said:

stuff not going how i want it to like when i took off the sata cable it took the L shaped plastic with it but still has the pins so now i need to find someone who knows how to fix that because i don't p.s. happened yesterday im resorted to useing older pc atm till i fix that :/

Like Gary said depends on what part has snapped off mate I did the top of a plug the other day and while my breakage wasn't worth fixing if it's in the mobo or drive socket then some VERY careful gluing might put it back together.

That two pack resin based stuff is good but make sure you only use the smallest amount you can and trim the excess with a very fin blade - a scalpel blade is ideal before it is set hard - you do have a few minutes where you can do that when it's in a semi gel state and make sure you give it at least 24 hours to cure / set properly before using the socket again.:)

will give this a go

Youtube

(re: https://plus.google.com/110493392733...ts/KPz8ubXS55a)

Kari, that is such a shame, You are going to miss quite a few good things on there, I really love how you can get the step by step guides to almost anything, But if you have or keep getting problems and constant buffering then I can see your point ,Do you think you may have an underlying software problem on your lappy ? :)