Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: It's the end of the light bulb as we know it

20 Sep 2013   #1
Brink
Microsoft MVP

64-bit Windows 10 build 10122
 
 
It's the end of the light bulb as we know it

Quote:
With new, stricter efficiency standards almost upon us, it's time to start thinking differently about your lights. Here's why you should feel fine.

In 2007, the US Congress under President George W. Bush passed the Energy Independence and Security Act. Key among its provisions was a new series of regulations mandating the gradual phase-out of the manufacturing, importation, and sale of inefficient lighting. We've already said goodbye to 75- and 100-watt incandescent light bulbs, and on January 1, 2014, we'll be bidding adieu to 40- and 60-watt bulbs as well.

The move is intended to kick-start a new era of longer-lasting, more efficient lighting, and according to some, it's a move that's long overdue. After all, incandescent bulbs waste up to 90 percent of the energy they consume on heat output, which is why incandescents get so hot when they're turned on. According to EnergyStar, if every American household replaced just one standard light bulb with one of its certified, high-efficiency light sources, we'd save about $600 million in annual energy costs and prevent 9 billion pounds of greenhouse gas emissions per year -- equivalent to the yearly output of roughly 800,000 cars.

Still, plenty of folks are concerned about the higher costs of higher efficiency, and some simply prefer the warm tone that you get from incandescents. Just before 100-watt incandescents were phased out last year, one in eight Americans said that they'd stockpile the bulbs when polled by lighting company Osram Sylvania, and you can find similar chatter right now with regards to the 40- and 60-watt varieties that are on their way out next year.

Regardless of whether you love the idea of a greener energy standard or hate the idea of additional mandates on the free market, the bottom line is that you're going to need to change the way you think about your lights. No longer will swapping a bulb out simply be a matter of slapping a buck or two down on the hardware store counter for a quick, readily disposable lighting fix. The bulbs of tomorrow are already here today, and they're more advanced, more efficient, and yes, more expensive. You're going to need to put some thought into which ones will serve as the best investments for your home.

In short, it's time to start thinking about light bulbs the way we think about appliances. Here's what you'll need to know.
Read more at: It's the end of the light bulb as we know it | Appliances - CNET Reviews
My System SpecsSystem Spec
20 Sep 2013   #2
beauparc

Windows 7 64 bit
 
 

I have a mixture of new ones and the old type in my house and, despite all the hype, I find that there is a considerable difference in the light output between the incandescent and the equivalent new type.

Now that I have reached the ripe old age of 70, I find it much safer use the stairs, lit by the old type, at night.

I also have sufficient of the old type, of all wattage, to see me to the end of my days

If you really want to save energy, go back to using candles
My System SpecsSystem Spec
20 Sep 2013   #3
jadinolf

Windows 7 Professional
 
 

R.I.P.
My System SpecsSystem Spec
.


20 Sep 2013   #4
boohbah

Microsoft Windows 7 Home Premium 64-bit 7600
 
 

Quote   Quote: Originally Posted by beauparc View Post
I have a mixture of new ones and the old type in my house and, despite all the hype, I find that there is a considerable difference in the light output between the incandescent and the equivalent new type.

Now that I have reached the ripe old age of 70, I find it much safer use the stairs, lit by the old type, at night.

I also have sufficient of the old type, of all wattage, to see me to the end of my days

If you really want to save energy, go back to using candles
the newer lightbulbs do last a while, i have them in every light socket in my house and they are fine, they need a few moments to brighten , i e they need to warm up before they are at maximum light but that said in three years or more ive replaced about two of them
My System SpecsSystem Spec
20 Sep 2013   #5
Lady Fitzgerald

Win 7 Ultimate 64 bit
 
 

Most of my lighting has been replaced with CFLs. I've found I have to use the next higher equivalent wattage as the original incandescent being replaced to get the same amount of light but they still made a huge dent in my power bill. Besides using less juice, they don't heat up as much, cutting the amount of air conditioning required. The light from the CFLs available now are just as warm as incandescents.

I've tried a couple of LEDs but one was too white and harsh. The second had the right color temperature but the bulb doesn't diffuse the light enough, creating an excessively bright spot inside the bulb, and the overall length of the bulb is too long for most of my fixtures so I need to do some more looking. It took me a while to find CFLs I liked but it was worth the effort.
My System SpecsSystem Spec
20 Sep 2013   #6
Brink
Microsoft MVP

64-bit Windows 10 build 10122
 
 

It's the end of the light bulb as we know it-rip-light-bulb.jpg


My System SpecsSystem Spec
20 Sep 2013   #7
Lady Fitzgerald

Win 7 Ultimate 64 bit
 
 

Quote   Quote: Originally Posted by Brink View Post
Personally, I feel it's good riddance.
My System SpecsSystem Spec
20 Sep 2013   #8
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

They outlawed mercury and now they a pushing bulbs with mercury in them.
I had a few of the goofy looking twisted bulbs last only about a year of part time use.
Now what do you do with them; they contain mercury.
If your $30.00 new style light bulb quiets working in a couple three years who do you go to for a free replacement. Who in the hell keeps a purchase record of a light bulb.
How does one test a bulb to see if it will last 40 years like advertised or estimate.
Most of my bulbs are the new kind and really not much of a problem except for reading. Can't seem to find one that gives proper light for reading.
The ones I have tried don't seem to like the cold. When I use them for outside porch use they don't make it through one winter. The old style bulbs would last for years and years. They cost about 25 cents @.
If you want to save money on lighting turn off the lights when not in need. Some houses I pass are lit up like the owner has stock in Ohio Edison.

Haven't been able to find any of these new style bulbs that weren't made in China.
A $30.00 light bulb should be made someplace other than China and be U/L tested. I like new and better but I don't like being hosed.
----------------
http://en.wikipedia.org/wiki/UL_%28s...rganization%29
My System SpecsSystem Spec
20 Sep 2013   #9
Golden

Microsoft Community Contributor Award Recipient

Windows 7 Ult. x64
 
 

You are only exposed to the mercury if you smash the bulb and then eat the shards, or grind them into your flesh. Bulbs with mercury in them are quite safe unbroken.
My System SpecsSystem Spec
20 Sep 2013   #10
Borg 386

Win 7 32 Home Premium, Win 7 64 Pro, Win 8.1 Pro
 
 

Sign of the times
My System SpecsSystem Spec
Reply

Thread Tools



Similar help and support threads
Thread Forum
Can anyone please shed any light on this?
Finally made the Windows 7 move on all workstations and I have been testing sleep mode on several machines. After many trials and tribulations - trying to understand Microsoft massive sleep changes since Vista (the big one being - the machine will not go back to sleep within the proper timeout...
General Discussion
HDD Light
Is there any problems with the hdd if the light is on the hole time ? On my school pc it flashing blue the whole time. If the hdd is broken, i need to repplace it and i don`t have that money.. Please answer. :)
Performance & Maintenance
light switch
Hey i wonder how i can manage a lightswitch on my videopage. (To make the screen lighter or darker with one click) Maybe there is some applications? Thank you
General Discussion
Too light for me
How does one make the menur "divider lines" (can't think of another term) darker? For example, right-click on the start globe. Reveals "properties" and "windows explorer." But when mousing over them, the highlighting & divider lines are so light that it's hard to see which is highlighted. Any...
Customization
HDD indicator light
MAIN ISSUE: Hey guys. Today I noticed that my HDD indicator light won't stop being on. It's not flashing; it's just solid ON. Also, I just tried using the Window's "check Disk for errors option" in the disk's properties but the Windows said that it could not check the disk while the disck is in...
General Discussion
HDD Light Off
I wasn't sure where to post this....so forgive me if I was wrong. I have been having a problem with what I think is my HDD, but yet again I'm not completely sure. Anyways my HDD is brand new, its a WD Caviar Black 1TB 7200RPM, all the stress tests come back with positive results when I run them...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App