New
#481
That's the important thing! As I was explaining it took a bit of time to really get to where I am now having vaped for the last 23 months and checking out a good variety of hardwares. I still keep a few eGo mini batteries around as well like one in a flash drive holder in case a battery I carry needs charging or quits on me while out. Those won't go all day only being 350mah but can bail you out of a tight spot in a hurry! Mini Ego Style 350mah Batteries
A year ago I had a pair in fact the actual last found of 3.5ml CE2 clearomizers with the pen style cap. It's rare finding them in that large of a capacity now however with those like the Smok FBC only being 2ml but when attached to a small battery you won't need a lot. One thing to know about the variables is once you turn things up you will find you will be going through a tank full a bit faster since you are getting a warmer vapor.
There also some safe vaping charts that show voltage, ohms, watts to refer to in order to prevent burning the atomizer out in something. The higher the voltage usually means going with a higher resistance. There are a good number of those at both vendors and other vaping sites to refer to. Here's what one looks like to get the general idea. Safe Vaping Power Chart(W=V2/R)
The reason I bring this up is I actually cooked one Vision 3.5ml clearomizer on the first Vamo I had when not realizing I had bumped it in reverse from 3 watts to 15 since there is no stop on those like other devices. I couldn't figure out why there was no vapor until going to look at the settings and said "oh foobar!"! You learn fast when something like this happens!
It helps to be forewarned on things! I've had some batteries go on me as well as burn marks on the wicks from dry hits on some of the old clearomizers and now stay strictly BCC or BDC(Bottom Dual Coil) that have tiny wicks instead. You get a much smoother vape once you get the right stuff together but still need to use some precautions.
Something I had to add here Dude was a price check on the kit you just bought in case you decide to get another. Believe me when I say price shopping around a bit can save some real $$$ at times!
Innokin iTaste CLK Variable Voltage 800 MAH + iClear 16D Kit = $29.94 a bit less then the other vendor. Another vendor was only $5 less but tossed in a bottle of ejuice they carry which is seen often when hardware shopping.(Don't care much for Dekang which is imported ejuice it seems.)
Last edited by Night Hawk; 15 Oct 2014 at 22:45. Reason: Additional information
Well bad night last night wrenched my system attempting to re-download win-10 on a bigger partition and of course messed that up somehow and it killed win-7
Grabbed a real sig about 5 times during the weird issue,
Now I have no partitions that win-7 or win-10 will install on,
Hopefully I can find a new ssd locally in a few hours and get some type of os on it preferably win-7,
I do have a system image but repair would not find it it needs an os of win-7 which is gone win-10 laughed I guess and I formatted E where I thought it wasn't so some where allow the lines win-10 installed on both partitions lol
Still haven't fallen off the wagon
Unlucky Thrashzone! Hope you get it sorted soon mate.
I have to say, after vaping this Deadly Sin for a day, it's really grown on me and I really quite like it now. A very pleasant vape :)
Ut Ohhhhhhh..... not a good move trying that one out! Should have isolated the newer version's preview on a separate drive to begin with due to the newer form of secure boot. As far as getting 7 back on if you have the dvd you can nuke the drive clean as long as everything you want was already backed up elsewhere and then put a clean install onto a new fresh primary.
When I go to look at what the preview is like I will first be unplugging the 7 host and then running the preview on a second OS drive without any dual boot config. I won't be vaping up a storm out of stress later since I plan to split up the second storage drive to use one partition for updating images and reduce the backup of everything from the first storage disk to the essentials.
I couldn't vape back when the early birds for 8 came out and watched as both that and 7 suddenly refused to even start up due to disk errors. The bios's F keys work miracles when it comes to selecting the drive before the OS keeping each isolated from each other just in case of an ut oh moment. The first thing now of course would be the nuke and back to the single primary if the image is stored elsewhere to see if you can then restore that. Otherwise Fresh "7" from scratch!
Sorry for the problem, Mike. I installed 10 and 7 on the same SSD without any problems. I guess your SSD just decided to give up the ghost at that time. Does it show up in BIOS or diskpart? It's a real bummer for that to happen. Hope you grt it sorted soon. It's a real tribute that you didn't fall off the wagon during all of that.
@Paul, Welcome to the club. There are Several of us in that club.
Thanks,
Nothing until mid next week Fry's wanted more than twice what newegg wanted,
I'm going out of town tomorrow morning anyway till probably Saturday night,
Cheers.
P.S. the only thing found was 557 bad sectors :)
Thats what happened with me. I like it OK, but after awhile it just grew on me.
I'm not sure what it is, but I can vape it all day without getting to tired of it. One of my favorites for that reason.
---------
Couple things I thought of guys that worth mentioning too. It may have been already and I missed a post but too many to go back through.
First, the voltages.
I know everyone will have a different preference, as some of us like a cooler vape and some of us like a a warmer vape.
But I think we are forgetting one very crucial variable in this equation.
And that is, what Ohms the coil is running at has a huge impact.
For example, paulpicks21 ..
You said you vape your Deadly Sin at 4.5v correct?
I've said I like mine at 4.0.
We may be using essentially the same thing. The reason this may be misleading is I run on a 1.2Ohm coil. If yours is says 1.8- 2.0 Ohms , 4.5 into that will be approx. the same as 4.0v into 1.2Ohm.
I haven't done the math or anything, just a quick guess, but it just hit me that that's a big factor.
In regards to Ohms on the coil ...
Lower the Ohm the faster the coil heats up. I think they burn just a touch hotter too, or seems like it.
Downside though is they use more power. In other words lower Ohms eats up battery faster.
Higher Ohms take longer to heat up, but your batter will last longer.
Which is better is ultimately a matter of personal preference. I like lower Ohm builds in my Kayfun, 1.2-1.4 and higher Ohm in my Kanger Aero 2.0-2.2
The next thing which some may not know about and I learned the hard way are juices they call 'Tank Crackers"
If your tank is all metal, or the see through part is real glass, you can do what you want this will not effect you.
But the majority have a plastic tank and thats where it matters.
Cinnamon (not light bakery cinnamon like in deadly sin, but the strong red hot cinnamon)
Bannanna
Pineapple
These are 3 I know of right off the top of my head are culprits, and theres a few others.
What happens, is your clear see through tank will start turning cloudy. Then you'll see little cracks or lines starting to appear. When this happens stop using it.
If you want to vape these types of juices, I would put them in a glass or stainless steel tank.
But keep in mind, some of these flavors will be OK in lower amounts or whatever. I would just check to see if that particular juice has a reputation for cracking tanks. if it does, a quick google search will tell you. Just a heads up.
Heres a list I found that may be helpful.
http://www.e-cigarette-forum.com/for...ml#post9660727