Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Any Vapers?

08 Nov 2014   #701
Wishmaster

Windows 7 Home Premium 64bit
 
 

Yes, thats how the nic would work.
5ml of 20mg and 5ml of 10mg would give you a final product of 10ml @ 15mg.


Mixing already made juices is how I got started. Then moved into DIY as you have a lot more options.
And like Nighthawk said, haste makes waste is very true. Always start slow and small.

Its also weird how certain flavors do not play well together and some do very well.
Sometimes, swapping your base helps get what your looking for.

What I mean is, say you want chocolate strawberries, and are mixing a simple chocolate and strawberry.
Say you use 75% Strawberry and 25% chocolate. But all you taste is strawberry,.
Sometimes swapping it to 75% chocolate and 25% strawberry may give you the result your looking for. And the Strawberry in this case could still be the Dominant flavor.

May be a bad example but, sometimes the dominant flavor is actually the weakest percentage wise. Sometimes not. just depends on what your using and what your looking for.

I find a dripper to be the best thing for testing. In my case Ill put 19 drops of pure PG in a beaker, and 1 drop of flavor. Mix it and drip it on the dripper. The will give an idea of what 5% tastes like. Then I'll try 10 and 15% or untill I find where it tastes best to me.

In the case of mixing flavors already made, the same idea applies. Do something like 9 drops of flavor A to 1 drop flavor B (90%/ 10%) or 5 drops each for 50/50/
Try it on a dripper and see what you got. Adjust from there.

This way may not be 100% accurate as it'll change once the entire mix is made, but its pretty close. And, keeps you from wasting alot of juice on a bad mix.

If you don't have a dripper, all you need a a little single coil cheap one. You can get them for about $10, and if you will be mixing your own flavors, from scratch or pre-made flavors, it'll be worth getting. Those cheap little drippers may not taste as good as your regular tank or whatever, but they will give you a very good idea where that juice stands your mixing.
My System SpecsSystem Spec
09 Nov 2014   #702
paulpicks21

Windows 7 Professional 64 bit
 
 

Quote   Quote: Originally Posted by Dude View Post
Good advice, but I seem to like to mix my flavors for variety. I go with a straight tank of one, then mix a couple, Maybe I should just try a bunch more.

I am not ready to make my own juice, so was just curious about mixing a few. I have one juice of 18mg and another of 11mg. If I mix them 50/50 in a tank, does it make it 14.5?

Noob question, what is the shelf life of the ejuice?

I thought about joining the ecig forum, but feel more comfortable asking here. So another question... I noticed I am vaping a whole lot more. That is one reason I am trying to cut the nicotine level down. I'm not feeling ill or anything that shows I'm getting to much nicotine, but am curious.

I started and used about 1.5ml a day. Now I am vaping about 3ml a day.
A lot of the juice I have ordered has expiry dates on. Generally it seems to be around 2 years.

Regarding the amount you vape now, you may just like vaping more but you will also find that using a higher voltage will use more juice. I imagine with your first kit you were vaping at around 3.7V and now I am sure you are using a lot higher voltage.
I think the average person uses 3-4ml a day, I certainly do.
My System SpecsSystem Spec
09 Nov 2014   #703
Wishmaster

Windows 7 Home Premium 64bit
 
 

The higher voltage does burn through the juice faster. And I could be wrong but it seems the more a blend leans towards the VG side the faster it goes too.
But I could just be imagining that and Im just vaping it more often
My System SpecsSystem Spec
.

09 Nov 2014   #704
Dude

Windows 10 Pro X64
 
 

Okay, thanks guys. I vape at 4.3. My juice has a made on date, but doesn't mention use by so was curious. I have learned a lot here, but will do a lot more homework before going in to making my own juice.
My System SpecsSystem Spec
09 Nov 2014   #705
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

If you want more vapor go with more VG! If you want more to taste then you go with the average 70/30 or 80/20 while some go totally 100 with either depending preferences. Some actually stick with 100% VG since they want to see clouds while the typical vaper runs 50/50 as a start point for some or what they would recommend while most will lean to the 70/30 ratio to get the most out of the flavors they pick.

Turning things up as far as wattage as well as voltage will take you through a full tank a bit faster. That's common fact there. But sometimes you need to kick in order to reach the favorite spot where a flavor seems best for your preferences while others may either run warmer or be running with non variables at 3.7 or with a variable turn it down instead since those start off at 3.2v Vamos at 3.3v on average.

What's interesting is taking a tank off of the Vamo V5 to put on the new V6 and finding it runs better there at 8 watts while the V5, plus the Innokin MVP, VTR, and v3.0s run at 7w to get the same results with the exact same tank and flavor. The one difference is the V6 only sees wattage adjustment while with the others you can keep the voltage right 3.7v or nudge it just a little to 3.8v or 3.9v.You still use up the flavor faster but keep the tank a little cooler by cranking watts not volts where you can risk the coil if either is up too high.
My System SpecsSystem Spec
09 Nov 2014   #706
derekimo

Microsoft Community Contributor Award Recipient

 
 

Quote   Quote: Originally Posted by paulpicks21 View Post
Quote   Quote: Originally Posted by Dude View Post
Looks like a good juice Paul. I picked up another flavor today, Black Honey Flue Cured Tobacco Eliquid from Ion Vapor and I went with 11mg this time instead of 18mg. I still have plenty of 18mg just in case.
Pretty low strength considering you quit so recently Doug. How do you like it? Looks very cheap anyway.
I did the same thing Doug, it's sitting in my drawer right now.

Same flavor too, it just wasn't doing it for me at the lower nic, I'll just mix it with something else.

I've got a few flavors I need to get rid of that way.

@Paul, what's the SF 5ml club? Are you already benchmarking your kits?
My System SpecsSystem Spec
09 Nov 2014   #707
Dude

Windows 10 Pro X64
 
 

I have mixed it with the bourbon flavor and it's good. 11mg was to much of a drop, but 14mg is good. I will keep mixing like that for a few more weeks then try 11mg again.

I am in the 2.5ml club myself, lol
My System SpecsSystem Spec
09 Nov 2014   #708
derekimo

Microsoft Community Contributor Award Recipient

 
 

I like that Bourbon flavor too, I'll probably use it as a mixer with that.

This is where I got mine,

Kentucky Bourbon e-Liquid

I just noticed they removed the ratio choices, so I may have to find a different place.

Oh, I see what the 2.5ml club is now, I haven't measured myself but I am going through about one of these a day,

INFERNO BC TubeTank System

Which is a 2.5ml tank.
My System SpecsSystem Spec
09 Nov 2014   #709
Dude

Windows 10 Pro X64
 
 

That inferno looks good Derek. I like that site you used for the Bourbon, just found this

V-6 Variable Voltage Kit

I'm doing a lot of looking around. I'm going to get a better kit, just can't decide on which on yet
My System SpecsSystem Spec
09 Nov 2014   #710
derekimo

Microsoft Community Contributor Award Recipient

 
 

Yeah, I like the inferno, it's doing the job for me. I may have went with something different the more I learn about the different kits.

I may be wishful in my thinking but I'm hoping to just ease out of the vaping at some point so I am trying to tell myself to quit looking for a new kit, I still look around though.

That is a nice looking kit, I see those tanks being offered on a lot of kits, they have the long wicks in them, not sure if that's good or bad.
My System SpecsSystem Spec
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:44.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App