Windows 7: BSOD Analysis - Getting Started

Dread86 · 02 Sep 2012

Having the same problem with symbols:

Code:

Microsoft (R) Windows Debugger Version 6.2.9200.16384 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\Minidump\090212-19437-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03812000 PsLoadedModuleList = 0xfffff800`03a56670
Debug session time: Sun Sep  2 20:14:49.867 2012 (UTC - 4:00)
System Uptime: 0 days 1:15:37.929
Loading Kernel Symbols
...............................................................
................................................................
..............................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ExceptionRecord                               ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information.  Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***                                                                   ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: ContextRecord                                 ***
***                                                                   ***
*************************************************************************
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!KiKernelCalloutExceptionHandler+e )

Followup: MachineOwner
---------

Vir Gnarus · 04 Sep 2012

There has been a common issue with Win32k symbols lately from the symbol server which many believe to be server-side problems. If you wish, you should verify by doing .reload /o /f /v. The output would be beneficial.

**x BlueRobot** · 10 Sep 2012

I've just downloaded a few dump files from the forums, and used the analysis tool for the files, so my question is it working properly (the debugger tool)?

I've started learning BSOD analysis

Thanks for any help,

Harry

EDIT:I think may got the problem resolved (:

Vir Gnarus · 10 Sep 2012

You'll need to resolve your symbol issue here as it's complaining about incorrect symbols. Having wrong symbols or no symbols will be very detrimental to the accuracy of your analysis.

Golden · 11 Oct 2012

Code:

SRV*c:\symbols*http://msdl.microsoft.com/download/symbols

Do I have to copy/paste this into File > Symbol File Path each time I open WinDbg? Isn't there away to tell it to always use that path?

Skylais · 11 Oct 2012

Quote: Originally Posted by Golden

Code:

SRV*c:\symbols*http://msdl.microsoft.com/download/symbols

Do I have to copy/paste this into File > Symbol File Path each time I open WinDbg? Isn't there away to tell it to always use that path?

What do you mean? you should only have to do it, once and it stays. check your hard drive and find, that folder. It will slowly grow over time, here is an example of mine.
You should be in good condition after you set it just once.

Arc · 11 Oct 2012

Do it one time, and then File> save workspace. Then forget it.

Golden · 11 Oct 2012

I tried some of the commands JK mentioned, but they dont seem to work for me:

Code:

0: kd> !sysinfo
!sysinfo [ cpuinfo | cpumicrocode | cpuspeed | gbl | machineid | registers | smbios ] [-csv | -noheaders]
0: kd> !sysinfo machineid
sysinfo: could not find necessary interfaces.
sysinfo: note that mssmbios.sys must be loaded (XPSP2+).
0: kd> !sysinfosmbios
No export sysinfosmbios found
0: kd> !sysinfo smbios
sysinfo: could not find necessary interfaces.
sysinfo: note that mssmbios.sys must be loaded (XPSP2+).
0: kd> process name
       ^ No runnable debuggees error in 'process name'
0: kd> PROCESS NAME
       ^ No runnable debuggees error in 'PROCESS NAME'
0: kd> PROCESS_NAME
       ^ No runnable debuggees error in 'PROCESS_NAME'

Arc · 11 Oct 2012

Try with another dump file.

Some of them does not contain all the information.

Golden · 11 Oct 2012

Ah OK - thanks Arc

Windows 7: BSOD Analysis - Getting Started

BSOD Analysis - Getting Started problems?