Bsod Windows 7 64bit

Hi Well I have a strange problem when testing a 3D graphics card brand is, nothing happens, and when the computer reboots while playing and then the 3D Mark test bSod restarts the computer card is operational was the latest gwarancji.Drivers are loaded, daemon tools uninstall anything not given, directx 11 installed. The computer is clean because I checked, tested the Memtest 86 so that frame repeatedly and is all in order.Temperatures are low at 40% of the maximum occurs during play. AC was also tested on another computer and graphics card and all is well. Drive also tested repeatedly . I think I understand what my problem, I ask you about some ideas can any of you have some?

DualCore AMD Phenom II X2 Black Edition 560, 3149 MHz (16.5 x 191)
MSI 770-G45 (MS-7599)
Corsair 430w
DIMM1: Kingston 9905471-001.A01LF
DIMM4: SpecTek ZC256M6408V79BD2J-
Karta Graficzna ATI Radeon HD 5700 Series
SAMSUNG HD502HJ (500 GB)

More or less know what's going on but I do not know such as how to get a BSOD then I start the computer in Safe Mode and your pack and put here? I set a small memory dump

Here is the shot I threw normal

Stop 0x124 is a hardware error.
if you are overclocking try resetting your processor to standard settings and see if that helps .
If you continue to get BSOD here are some more things you may want to consider.


Stop 0x124 - what it means and what to try.

Synopsis:

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.


Generic "Stop 0x124" Troubleshooting Strategy:

1) Ensure that none of the hardware components are overclocked. Hardware that is driven beyond its design specifications - by overclocking - can malfunction in unpredictable ways.

2) Ensure that the machine is adequately cooled. If there is any doubt, open up the side of the PC case (be mindful of any relevant warranty conditions!) and point a mains fan squarely at the motherboard. That will rule out most (lack of) cooling issues.

3) Update all hardware-related drivers: video, sound, RAID (if any), NIC... anything that interacts with a piece of hardware. It is good practice to run the latest drivers anyway.

4) Update the motherboard BIOS according to the manufacturer's instructions. Their website should provide detailed instructions as to the brand and model-specific procedure.

5) Rarely, bugs in the OS may cause "false positive" 0x124 events where the hardware wasn't complaining but Windows thought otherwise (because of the bug). At the time of writing, Windows 7 is not known to suffer from any such defects, but it is nevertheless important to always keep Windows itself updated.

6) Attempt to (stress) test those hardware components which can be put through their paces artificially. The most obvious examples are the RAM and HDD(s). For the RAM, use the in-built memory diagnostics (run MDSCHED) or the 3rd-party memtest86 utility to run many hours worth of testing. For hard drives, check whether CHKDSK /R finds any problems on the drive(s), notably "bad sectors". Unreliable RAM, in particular, is deadly as far as software is concerned, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result from the diagnostics utilities does not guarantee that the RAM is free from defects - only that none were encountered during the test passes.

7) As the last of the non-invasive troubleshooting steps, perform a "vanilla" reinstallation of Windows: just the OS itself without any additional applications, games, utilities, updates, or new drivers - NOTHING AT ALL that is not sourced from the Windows 7 disc. Should that fail to mitigate the 0x124 problem, jump to the next steps. Otherwise, if you run the "vanilla" installation long enough to convince yourself that not a single 0x124 crash has occurred, start installing updates and applications slowly, always pausing between successive additions long enough to get a feel for whether the machine is still free from 0x124 crashes. Should the crashing resume, obviously the very last software addition(s) may be somehow linked to the root cause.
If stop 0x124 errors persist despite the steps above, and the harware is under warranty, consider returning it and requesting a replacement which does not suffer periodic MCE events. Be aware that attempting the subsequent harware troubleshooting steps may, in some cases, void your warranty:

8) Clean and carefully remove any dust from the inside of the machine. Reseat all connectors and memory modules. Use a can of compressed air to clean out the RAM DIMM sockets as much as possible.

9) If all else fails, start removing items of hardware one-by-one in the hope that the culprit is something non-essential which can be removed. Obviously, this type of testing is a lot easier if you've got access to equivalent components in order to perform swaps.

Should you find yourself in the situation of having performed all of the steps above without a resolution of the symptom, unfortunately the most likely reason is because the error message is literally correct - something is fundamentally wrong with the machine's hardware.

Click to expand...

http://www.sevenforums.com/crash-lockup-debug-how/35349-stop-0x124-what-means-what-try.html

I have nothing overclocked does not help here again BSOD;/

I now have a video card from a friend Nivida GT 440 and the computer normally, but it now wants to know the reason why my ATI card I turn the computer on it: (

SAPPHIRE RADEON HD 5750

I noticed when I have a friend's card NVIDIA GeForce GT 440 is no longer playing I lag for full details I do not know if this card a little better or just better is it? I have no idea

Before replacing the AMD graphics with NVIDIA, you need to remove the AMD software and drivers. The same goes if you replace the NVIDIA with the AMD card. Use the following steps for each:

1. Download the latest drivers for your display card(s)
2. Click Start Menu
3. Click Control Panel
4. Click Uninstall a program
5. For NVIDIA:
   • Uninstall the NVIDIA Graphics Driver (this should uninstall all NVIDIA software and drivers)
   • Restart your computer
   • Make sure NVIDIA 3D Vision Driver, NVIDIA 3D Vision Video Player, NVIDIA HD Audio Driver, and NVIDIA PhysX System Software are not still listed under Uninstall a program through Control Panel
   • If any remain of the above, uninstall one at a time
   • If asked to restart after uninstalling any of the above, do so, and continue uninstalling any remaining NVIDIA items until all are removed
6. For AMD:
   • Uninstall AMD Catalyst Install Manager if it is listed (this should remove all AMD graphics software and drivers)
   • If AMD Catalyst Install Manager is not listed, use the following method to uninstall the graphics drivers:
     1. Download the latest drivers for your display card(s)
     2. Click Start Menu
     3. Right Click My Computer/Computer
     4. Click Manage
     5. Click Device Manager from the list on the left
     6. Expand Display adapters
     7. Do the following for each adapter (in case you have multiple display cards)
        • Right click the adapter
        • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
        • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
     8. Restart your computer after uninstalling drivers for all display cards
     9. Install the latest driver for the display cards once Windows starts
     
     Alternatively:
     1. Login as an adminstrative user
     2. Download the latest drivers for your display card(s)
     3. Click Start Menu
     4. Click Control Panel
     5. Click Hardware and Sound
     6. Click Device Manager (the last link under Devices and Printers)
     7. Expand Display adapters
     8. Do the following for each adapter (in case you have multiple display cards)
        • Right click the adapter
        • Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
        • Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
7. Restart your computer after uninstalling drivers for all display cards
8. Install the latest driver for the display cards once Windows starts

It will not give you realize that the ATI card and the computer restarts when I have a card from a friend computer normally comes with him my card comes normally! :/

Windows 7 64 bit bios settings

Hi I have a problem that gets on your card ati blue screen I do not want to give you the BSOD because it will not do anything I want from you to help to set my bios well because the idea is that the ATI driver conflict with the bios or do not want to give link together to my bios and ask for help because I can not play anything, and I know that even just the ability to be tweaking in the BIOS options.




DualCore AMD Phenom II X2 Black Edition 560, 3149 MHz
MSI 870-G45 (MS-7599)
Corsair 430w
DIMM1: Kingston 9905471-001.A01LF
DIMM2: SpecTek ZC256M6408V79BD2J-
Karta Graficzna Sapphire Radeon HD 5750 Series
SAMSUNG HD502HJ (500 GB)