Windows 7 - Constant bsod

diabolikkk · 07-11-2010

I built a computer with this specs:
mobo- asus m4a79t
cpu- phemon ii x4 945
video-pny gts 250 1gb
ram- 2 gb x 1 ddr3 1333

and it was good for 2 days, then after i turn it on before Windows 7 loaded it crashes, the only way i can get it to work is changing the ram place, but that's everyday. , and got worst when i updated Windows 7.

please help.

i uploaded my minidump.

usasma · 07-11-2010

There is one Driver Verifier Enabled Minidump mixed in amongst all the other "regular" minidumps.
Have you turned Driver Verifier off? If not, please do so immediately!

The Driver Verifier dump blames AsIO.sys - a component of the Asus AISuite or PCProbe software. I would suggest uninstalling the software as it's not necessary for proper functioning of your system. Then, go to C:\Windows\System32\drivers and check to make sure that AsIO.sys is gone. If not, rename it to AsIO.BAK

Because of the large number of Memory Management and other memory related errors, I'd also suggest that you run this free memory diagnostic: Memory Diagnostics (read the details at the link)

Also, please remove or update these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall OR remove:

Quote:

How To Find Drivers:
- I have listed links to most of the drivers in the code box below. Please use the links there to see what info I've found about those drivers.
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.

- - The most common drivers are listed on this page: Driver Reference
- - Driver manufacturer links are on this page: http://www.carrona.org/drvrdown.html

Here's the older drivers (You can look them up here: Driver Reference ).
Please pay particular attention to any dated 2008 or earlier:

Code:

AsIO.sys     Mon Dec 17 04:10:20 2007 - Asus PCProbe Utility - http://www.carrona.org/dvrref.html#AsIO.sys
Dyncal.sys   Wed Nov 07 06:15:43 2007 - Padix/Ruling Technologies dynamic calibration driver - http://www.carrona.org/dvrref.html#Dyncal.sys

BSOD BUGCHECK SUMMARY

Code:


Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Sun Jul 11 15:03:57.589 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:42.321
BUGCHECK_STR:  0x1a_41284
PROCESS_NAME:  nvSCPAPISvr.ex
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Sat Jul 10 19:40:38.666 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:25.008
BUGCHECK_STR:  0x1a_41284
PROCESS_NAME:  svchost.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Fri Jul  9 19:53:09.477 2010 (UTC - 4:00)
System Uptime: 0 days 0:02:40.819
*** ERROR: Module load completed but symbols could not be loaded for AsIO.sys
BUGCHECK_STR:  0xc4_f6
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME:  UpdateChecker.
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Fri Jul  9 17:51:54.974 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:26.691
BugCheck 1000008E, {c0000005, 82b62067, 932fd6bc, 0}
Probably caused by : fileinfo.sys ( fileinfo!FIStreamLog+6f )
BUGCHECK_STR:  0x8E
PROCESS_NAME:  svchost.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Fri Jul  9 17:48:48.260 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:24.602
BugCheck 1000008E, {c0000005, 82cb4d06, 94b51bb4, 0}
Probably caused by : ntkrpamp.exe ( nt!CmpCloseKeyObject+bf )
BUGCHECK_STR:  0x8E
PROCESS_NAME:  spoolsv.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Thu Jul  8 22:33:59.959 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:26.676
*** WARNING: Unable to verify timestamp for Unknown_Module_598f2a40
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_598f2a40
BUGCHECK_STR:  0x1a_41201
PROCESS_NAME:  spoolsv.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Wed Jul  7 18:12:17.776 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:24.119
BUGCHECK_STR:  0x1a_41790
PROCESS_NAME:  explorer.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Mon Jul  5 22:10:47.051 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:28.393
BUGCHECK_STR:  0x19_20
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨

diabolikkk · 07-11-2010

thanks.. im starting to work on this right away. ill feedback asap.!!!

diabolikkk · 07-11-2010

hi again...! ran the memory test and had no errors at all. somehow i cant find dyncal.sys driver, and how i install this one? thanks

usasma · 07-12-2010

I would suggest going to C:\Windows\System32\drivers and renaming dyncal.sys to dyncal.BAK
Then reboot to be sure it isn't loaded.

Windows 7 - Constant bsod

Constant bsod problems?