Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: DVC100 Driver Installation Interrupted - Win 7

03 Feb 2011   #1

Windows 7 Ultimate x64
 
 
DVC100 Driver Installation Interrupted - Win 7

Seeing as how no one replied to my last post due to no one actually knowing the problem, I am posting a new thread, hopefully giving you all a more understanding of my situation. Ive been reading everywhere that people are having driver installation issues with the DVC100 from the Dazzle cards. I am using Windows 7. I recently noticed that when i try to install my DVC100 driver, before finishing the installation it gives me a message saying "Installation was interrupted before finishing the installation." I've tried everything INCLUDING running the setup wizard as administrator. Even the drivers off Pinnacle's website get interrupted. Can ANYONE help me?



Attached Thumbnails
DVC100 Driver Installation Interrupted - Win 7-imag0033.jpg  
My System SpecsSystem Spec
.

04 Feb 2011   #2

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

I don't own the device, but Pinnacle Systems (the manufacturer) lists Vista drivers for the DVC100:
Pinnacle - Dazzle* Hardware Installer for Studio 10

They could probably work with Windows 7 as well (If they've issued Vista drivers, they will probably have official Windows 7 drivers when Windows 7 is released.)

If you are having problems - try running in compatibility mode (i.e: admin privileges, run in Vista/Server 2008)
My System SpecsSystem Spec
06 Feb 2011   #3

Windows 7 Ultimate x64
 
 

I already ran it in compatibility mode AND with admin privileges. I have a brand new HP compaq laptop and it meets all of the minimal requirements to run this device. It must be something with my laptop but the question is, what? I've turned my firewall AND Norton off. so everything should run just fine. Another thought was that maybe it doesn't run with Windows 7, but two of my friends have Dazzle cards, one HD and one regular, and they both run off of Windows 7 and they had NO problems.
My System SpecsSystem Spec
.


06 Feb 2011   #4

win 7 ultimate32bit, Win8.1pro wmc 32bit
 
 

Quote   Quote: Originally Posted by Phantomist View Post
I already ran it in compatibility mode AND with admin privileges. I have a brand new HP compaq laptop and it meets all of the minimal requirements to run this device. It must be something with my laptop but the question is, what? I've turned my firewall AND Norton off. so everything should run just fine. Another thought was that maybe it doesn't run with Windows 7, but two of my friends have Dazzle cards, one HD and one regular, and they both run off of Windows 7 and they had NO problems.
Hi Phantomist ,Welcome to the forums , It may be the program is trying to write to a file which it cannot , try this Take Ownership Shortcut if needed, take control of the entire c drive
My System SpecsSystem Spec
06 Feb 2011   #5

Windows 7 Ultimate x64
 
 

It says not to take control of the c drive with this.
My System SpecsSystem Spec
12 Nov 2011   #6

Windows ultimate x64
 
 
Found a solution!

Hi, just to let you know i found a solution at the age of 15 before the useless customer service at pinnacle;

1. Uninstall your dazzle dv100 in the device manager.
2. Download uniblue driver scanner 2011 (NOTE HAS TO BE 2011) link; http://www.**************/?4kyky8b86u7johp
3. Hit register and enter in;
4. A seral key for it is; PS-FAQ2S-KCVE7-3JWEA-YNUK5-X57S9-D25YZ
5. After this you shouldbe registered; scan for drivers and if the program finds the dv100 skip to step 7.
6. In the right hand side of the prgram you should be able to update to a newer version; by doing this you allow the program to find your dv100.
7. After following the instructions; scan again.
8. Now click on the driver updates tab; and look for dv100 driver; ten click download.
9. Then follow the on screen instructions and a driver should be installed.
10. Now you can use your dv100!

I found this solution myself so it should work!
Thanks!
My System SpecsSystem Spec
Reply

 DVC100 Driver Installation Interrupted - Win 7





Thread Tools



Similar help and support threads for2: DVC100 Driver Installation Interrupted - Win 7
Thread Forum
Win 7 installation error: installation must be on a local driver Installation & Setup
Dazzle DVC100/Pinnacle Studio 14 Volumn Slider Bar Missing Sound & Audio
Black Screen after interrupted update installation BSOD Help and Support
Pinnacle Dazzle DVC100 Audio Hardware & Devices
Dazzle Dvc100 & Widows Live Movie Maker Software
why wont my DVC100 dazzle platinum card work Hardware & Devices
itunes installation interrupted Software

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:50 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33