Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Installing driver after turn on pc.

09 Jul 2009   #1
calvo86

Windows 7 7260 32-bit
 
 
Installing driver after turn on pc.

Hy
Everytime when i reboot or turn on my pc they install video controller for my integrated motherboard graphic card. I dont know why? Everything works fine, only i have is that tyni problem. And i need some help obout that

W7 7260 32bit
asrock motherboard
geforce 7600gt agp
pentium 4 3.0


My System SpecsSystem Spec
.
09 Jul 2009   #2
srq2625

Win7 Ultimate, x64
 
 

As you have a GFx card, have you considered editing you BIOS to disable/turn off your integrated video? Doing that, Win7 won't be able to see it and, therefore, won't want to install drivers for it.
My System SpecsSystem Spec
09 Jul 2009   #3
calvo86

Windows 7 7260 32-bit
 
 

I already want to do that, but.. i cant find that option in my bios. Only i found is something.. boot video controller and i have: agi/pci/onboard, pci/agi/onboard and onboard/agi/pci. Any idea?
My System SpecsSystem Spec
.

09 Jul 2009   #4
srq2625

Win7 Ultimate, x64
 
 

Looking at the Owner's Manual for your board (I downloaded it from the Asrock site):
  • What is listed as a AGP slot on the diagram is actually described as an Asrock Graphics Interface (AGI)
  • This AGI supports a limited number of AGP cards - see pages 8 and 9 of your owner's manual.
  • It would appear you are correct - there does not appear to be any way to actually disable the onboard GFX
  • It would appear, from the description on page 25, that these choices refer to the order in which the MBO will look for a GFx card. Assuming this is correct, I would think you would want to select AGI/PCI/OnBoard.
My System SpecsSystem Spec
09 Jul 2009   #5
calvo86

Windows 7 7260 32-bit
 
 

Ok. If i understand you i must select agi/pci/onboard. Or there does not appear to be any way to actually disable the onboard graphics.
I will try this and report.
My System SpecsSystem Spec
09 Jul 2009   #6
srq2625

Win7 Ultimate, x64
 
 

Quote   Quote: Originally Posted by calvo86 View Post
Ok. If i understand you i must select agi/pci/onboard. Or there does not appear to be any way to actually disable the onboard graphics.
I will try this and report.
I'm guessing on the first part. I haven't seen your MBO. All I have to go by is what I read in the manual for the MBO.

I really hope I've been of help but fear I've missed the target.
My System SpecsSystem Spec
09 Jul 2009   #7
calvo86

Windows 7 7260 32-bit
 
 

I read the manual for my MBO. I also select agi/pci/onboard and nothing happen, same thing. But i found something in manual, first add and install agp vga video card and drivers, than install onboard vga drivers. Maybe is that problem. But i dont know in which order i install that
My System SpecsSystem Spec
09 Jul 2009   #8
srq2625

Win7 Ultimate, x64
 
 

Is your video card on the list of supported cards? If not, it may be time to get a new card - a PCI card.

If it is, I would have to resort to experimentation:
  • If you haven't done so already, get the latest applicable drivers for your card from the Nvidia site
  • Install the card (D'oh)
    • Set a restore point
    • Install the vga drivers
    • Install the drivers for your AGP card
    • Reboot the computer
    • If it worked, you're done!
  • OK, that didn't work so
    • Recover to the restore point you set
    • Install the Nvidia drivers
    • Install the drivers for the onboard
    • If it worked, you're done!
  • If you've gotten here without a solution you could consider one of the following:
    • Forget about using your AGP card and just use the onboard. Ugly? Yes, but it's an option.
    • Get a PCI card
If none of the above works, then I'm out of options and it's time to find someone who knows more about this than me (that shouldn't be too hard).
My System SpecsSystem Spec
09 Jul 2009   #9
zigzag3143

Win 8 Release candidate 8400
 
 
vid driver

Quote   Quote: Originally Posted by calvo86 View Post
Hy
Everytime when i reboot or turn on my pc they install video controller for my integrated motherboard graphic card. I dont know why? Everything works fine, only i have is that tyni problem. And i need some help obout that

W7 7260 32bit
asrock motherboard
geforce 7600gt agp
pentium 4 3.0
could you go to device manager (type device manager in search) and check to see if the video driver is correctly installed and see if there are any unknown devices.

Ken
My System SpecsSystem Spec
09 Jul 2009   #10
Antman

 

Quote   Quote: Originally Posted by calvo86 View Post
I read the manual for my MBO. I also select agi/pci/onboard and nothing happen, same thing. But i found something in manual, first add and install agp vga video card and drivers, than install onboard vga drivers. Maybe is that problem. But i dont know in which order i install that
In device manager, Disable the offending adapter.
My System SpecsSystem Spec
Reply

 Installing driver after turn on pc.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Installing new wireless adapter, hardware switch won't turn it on.
Aight. I've been having a lot of issues installing my new wireless adapter because Acer is retarded. I just got a new Intel AC-7260 wifi adapter with bluetooth, and I promptly installed it onto my computer. -I have all the correct drivers installed -Launch manager is installed -The hardware...
Network & Sharing
Installing new Nvidia drivers and it took a turn for the worst
My computer has been acting up lately but tonight has topped it. I was changing wallpapers on my desktop tonight and my desktop was locking up (not the first time it has done random lock ups but was fed up with it by now) so I though maybe its the graphics cards and went ahead and installed the...
Drivers
Installing DRIVER for my laptop neo b3362, error Intel(R) driver miss
i changed the OS of my laptop from windows7 starter to windows ultimate x64. but i cant connect my laptop to the internet. some drivers are missing. {2 BASE SYSTEM DEVICE DRIVER missing, ETHERNET CONTROLLER DRIVER missing, NETWORK CONTROLLER and VIDEO CONTROLLER DRIVER is also missing.} Can...
Drivers
monitor wont turn on after installing ide to sata adapter
Hey guys, I have used all my SATA ports on my motherboard (4 HDs on them), but i wanted to use my dvd burners, so I bought a IDE to SATA connector, to use on the DVD burners, the PC turns on and boots fine, but my monitor LG L192WS wont turn on, with the connector connected, what could be the...
Hardware & Devices
Turn off Windows 7 Automatic Driver Installation
Most of the crashes happens because of a bad drivers. Unfortunately most of the time these bad drivers are coming from Windows Update. Because it won't pick the best driver. So when we troubleshoot BSOD it's best to disable automatic driver installation so we can make sure we are downloading the...
Drivers
Bluetooth driver suddenly turn off
I'm having a problem with my bluetooth driver in my laptop. When i turn on my laptop, the bluetooth device will appear just for several minutes. After that, it will turn off automatically and disappear from the tray. I've tried find the bluetooth device through control panel and device management...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App