New
#1
Sata PCI I/O Controller add-on Card
I purchased this add-on card for my older AMD 2400mhz 1gb ram box. This is the computer with Win7 on the 500gb Pata IDE hard Drive. I wanted to add a 1TB Sata drive since the MB does not have sata. The card has 2 sata connections, 4 USB ports, & 1 IDE connection. It just plugs into an empty PCI slot. For some reason Win7 does not detect the card & when I try to install the drivers Win7 says cannot detect any hardware. The card has VIA VT6421A chipsets.
Description:
Requirement
- Power by VIA Chip - SATA RAID + ATA133/100 + USB
- Internal Interface 1 x Serial ATA 150 + 1 x ATA 133
- External Interface 1 X SATA 150
- External Interface 4 X USB 2.0 Port
- 2 Ports SATA supports RAID 1/0 0+1, and PIO mode 4/3/2/1/0
- Support 24 bit hard disk mode >147MB (Please check with Microsoft website for enable 24 bit Mode)
- Support IDE bus Ultra DMA at ATA 133/100Mbytes/sec PCI burst rate
- Support maximum PCI bus master data transfer rate of 266MB/sec.
- PCI interrupt sharing and coexists with main board IDE controller
- 100% Plug and Play
- 100% Brand New
Here is the item on eBay
- Support Windows 95, 98, 98SE, ME, NT4.0, 2000 and XP
PCI 3 in 1 Card 2X SATA RAID + 1X IDE ATA 133 + 4X USB - eBay (item 160309427900 end time Jan-14-09 10:01:13 PST)