Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: ATI 11.10 Drivers = Overscan on HDTV

01 Nov 2011   #1
Hahaiah

Windows 7 Ultimate
 
 
ATI 11.10 Drivers = Overscan on HDTV

I've been running my w7x64 off of my G73jh laptop for two years now. HDMI to a Vizio V042 42" HDTV.

11.9 Drivers work fine so it's not the TV.

11.10 display so you cant see the edges of the screen, but on the laptop display it's fine. I noticed the overscan controls are grayed out now. If I change the resolution to 1280x720 the display is fixed and controls are back. If I roll back the drivers, all controls are back as well. Seems to me it's the new drivers but thought I'd post.

I'm tempted to try a custom resolution display, but the warning of damaging the TV made me pause.

Any thoughts?


My System SpecsSystem Spec
.

01 Nov 2011   #2
Hipster Doofus

Windows 7 Pro x64 -- PCLinuxOS KDE4 FullMonty 2011
 
 

Thanks for the heads up. I'll stick with 11.9 for now.
My System SpecsSystem Spec
02 Nov 2011   #3
officious

Windows 7 64bit
 
 

I'm having the same issue; I guess I'm going to have to try the 11.9 drivers and HDMI.

Have you tried installing the Catalyst application profiles 11.9 version?
My System SpecsSystem Spec
.


Reply

 ATI 11.10 Drivers = Overscan on HDTV




Thread Tools





Similar help and support threads
Thread Forum
HTPC Overscan Issue - Nvidia 7800 GT
http://www.avforums.com/forums/attachments/tvs/195413d1281895594-sony-kdfe50a12-hdmi-dvi-overscan-img_0219.jpg Hello Everyone, I currently am experiencing a similar issue to the above image. I'm trying to hook up one of my older systems to my Sony Bravia TV, and am experiencing my start...
Graphic Cards
ATI Overscan settings take 5 minutes to load at startup.
When i start my computer up i have a big black border around the screen, which after 5 minutes goes away. I have set the scaling options from the default 5%, to 0% in the AMD Vision control center. but still there seems to be 5 minutes of delay everytime i start my pc up before these settings...
Graphic Cards
Disappearing overscan settings after monitor is put to sleep
I'm running Win7, with AMD HD 3200 series integrated graphics on a Gigabyte motherboard, GA-MA78GM-S2H. Monitor is LG W2253V, at 1920x1080, connected via HDMI. When I first connected this monitor with HDMI, the picture did not fill the entire screen of the panel. I used the Vision Engine...
Graphic Cards
ati CCC overscan issue
Just reinstalled my ati3450 and I cant get to the page in CCC that handles the overscan, I have a 2 inch border around the desktop! In 9.5 it always defaulted to -15% or whatever and i need it at 0%, but I cant get to the dialogue in the new version, anyone any ideas how I can fix this?
Graphic Cards
Dual Monitor (Monitor+HDTV) Setup, HDTV Resolution Problem
I apologize if this issue has been brought up before, I tried searching but it's tough trying to find stuff sometimes. But here's the problem, like the subject says I have a dual monitor setup. I can move windows media center to my 40" HDTV from my 26" LCD Monitor and it's fine. I can play...
Media Center
getting a HDTV
I am getting a HDTV and I want to stream whatever is my laptop wirelessly like I have seen in the comercials. How do I do that?
Music, Pictures & Video

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App