Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: DX DirectDraw accel, 3D accel, and AGP texture accel not available?

18 Dec 2011   #1
Skypatrol250

Windows 7 Ultimate 32-bit
 
 
DX DirectDraw accel, 3D accel, and AGP texture accel not available?

Hi, I have tried everything on the internet... And simply cannot find a solution to the problem.

Whenever i try to run a game, it says DirectX hardware acceleration is turned off.
I then run dxdiag, and DirectDraw accel, 3D accel, and AGP texture acceleration are all listed as "not available" There is no button next to them to enable them.

I have tried re installing DirectX, but to no avail. Also, I have tried updating my video cards, but again, no luck.

Attached is my PC information, and the screen where everything is unavailable.
Pleeeaaase help me... ASAP!


My System SpecsSystem Spec
.
18 Dec 2011   #2
pebbly

win 7 ultimate32bit, Win8.1pro wmc 32bit
 
 

hi Skypatrol250, Welcome to the forums ,Would you be so kind and tell us the make/model of your graphic card please , that way we may be able to assist you further
My System SpecsSystem Spec
18 Dec 2011   #3
Skypatrol250

Windows 7 Ultimate 32-bit
 
 

NVIDIA GeForce 9800 GTX/9800 GTX+
Is my current video card
My System SpecsSystem Spec
.

18 Dec 2011   #4
pjhutch

Windows 7 Home Premium 32bit
 
 

Open DirectX Diagnostics (dxdiag.exe) and on the Display tab or the right hand side it will display the current driver installed. What does it say on it?
My System SpecsSystem Spec
18 Dec 2011   #5
Skypatrol250

Windows 7 Ultimate 32-bit
 
 

Everything is blank on that page. does that mean its not reading my driver?
My System SpecsSystem Spec
18 Dec 2011   #6
pebbly

win 7 ultimate32bit, Win8.1pro wmc 32bit
 
 

Skypatrol re download and reinstall the drivers http://uk.geforce.com/drivers/results/38960 there may have been a problem with the original download
My System SpecsSystem Spec
18 Dec 2011   #7
Skypatrol250

Windows 7 Ultimate 32-bit
 
 

No luck
It finished, and i restarted my system as it said... But it still says the same.... nothing.
My System SpecsSystem Spec
18 Dec 2011   #8
pebbly

win 7 ultimate32bit, Win8.1pro wmc 32bit
 
 

Skypatrol ,could you please give us a litte more information on your PC system make/model etc
My System SpecsSystem Spec
18 Dec 2011   #9
Skypatrol250

Windows 7 Ultimate 32-bit
 
 

System Information
------------------
Time of this report: 12/18/2011, 12:28:24
Machine name: PARENTS-PC
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_gdr.111025-1503)
Language: English (Regional Setting: English)
System Manufacturer: INTELR
System Model: AWRDACPI
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel(R) Pentium(R) 4 CPU 3.40GHz (2 CPUs), ~3.4GHz
Memory: 1536MB RAM
Available OS Memory: 1536MB RAM
Page File: 1109MB used, 1961MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
My System SpecsSystem Spec
18 Dec 2011   #10
pebbly

win 7 ultimate32bit, Win8.1pro wmc 32bit
 
 

Thank you for that Skypatrol , but it does not tell us a lot ,what is the make and model of the pc
My System SpecsSystem Spec
Reply

 DX DirectDraw accel, 3D accel, and AGP texture accel not available?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Direct 3D and DirectDraw Acceleration problem.
Hi everyone! I recently installed windows 7 ultimate on my PC. My specs are: 1GB RAM DDR1 Asus motherboard (Dunno whch one but i know its old) Intel Pentium 4 2.4GHZ Nvidia GeForce 6000 graphic card. Ok so i have directx 11. I went to RUN and typed DXDIAG. I can see that directx...
Drivers
Cannot disable DirectDraw/D3D Acceleration
Honored you, first of all sorry for my bad english and sorry if I post this one to the wrong forum, but I don't really know that is this a video card or monitor or driver problem. So I wanted to disable DirectDraw Acceleration in dxdiag. On winXP the method was: dxdiag to the Run... Display...
Graphic Cards
Windows 7 x64 mouse accel
I just upgraded from W7 32bit to 64bit and I'm noticing a big change in my mouse. I'm experiencing a lot of mouse accel, and I can't seem to be able to turn it off. I've tried several mousefixes (including Mark C's) and tweaks in W7 but nothing seems to work. Is it the 64bit version that has...
Performance & Maintenance
Mouse Accel on Windows 7
Hey all, I just switched to Windows 7 64-bit and during games and such I've noticed there's a mouse acceleration. To remove this, i've tried; Using the Vista mousefix.
Gaming
Windows 7 Mouse Accel
Any way to turn off mouse accel completely in Win7? running build 7600-
Gaming


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:05.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App