Drive Device Drivers needed; please insert floppy/ empty driver folder  

I was wondering if anyone could give some insight here. I've gone up to tier 2 techs so far that still don’t seem to have a clue as to what is going on.

This is the gist of what I'm running, to be followed by the quite annoying problem...
-CD:24X Double Layer Dual Format DVD+-R/+-RW + CD-R/RW Drive
-CPU:AMD FX-8120 3.10 GHz Eight-Core AM3+ CPU 8MB L2 Cache & Turbo Core Technology
-HDD:* 60 GB OCZ Agility 3 SATA III 6.0Gb/s SSD - 525MB/s Read & 475MB/s Write [-60] (60GB x 2 (120GB Capacity) Raid 0 Extreme Performance)
-MEMORY:8GB (2GBx4) DDR3/2000MHz Dual Channel Memory
-MOTHERBOARD:* [CrossFireX] GigaByte GA-970A-D3 AMD 970 Socket AM3+ ATX Mainboard w/ On/Off Charge, 7.1 Audio, GbLAN, USB3.0, SATA-III RAID, 2 Gen2 PCIe X16, 3 PCIe X1 & 2 PCI
-OS:None - FORMAT HARD DRIVE ONLY

The OS, of course is the problem here. I have read up on and been told many things each less helpful than the last. I'm going to tell you what is happening and maybe let you draw up a better theory.

I boot up the machine, and just like normal it prompts you to insert your disk. I put the windows 7 home ed. 64bit OS full version disk in and it starts to run through it. I get past the part where it is asking me for the language, country, and currency to the part where it is collecting information. This is where I get my error. It tells me that I need CD/DVD drive device drivers. I followed the last techs advice all of the way to when he was stumped...I got onto the AMD web site and downloaded the AHCI and RAID drivers onto a thumb drive. Only problem is, when I open up the appropriate removable disk drive all it shows is empty folders for the AHCI & RAID. The tech traced my steps and says..."hmm oh my, you're right, the folders are empty. I've never seen that before...I need to talk with my colleagues and I'll try to get back with you tomorrow.”

Wtf man. Maybe it’s just my no bull shit way of thing but don’t believe that they weren’t supposed to have these on there already. Installing an operating system is supposed to be a run of the mil procedure that any Joe Blow can do…not go over the head of their “teir two techs”.

Can anyone give me a plain easy to understand and follow answer to this?

GeoF welcome to the Seven Forums.

Only problem is, when I open up the appropriate removable disk drive all it shows is empty folders for the AHCI & RAID.

Did you extract the download first (7zip works well for this), or just put the downloaded exe on the thumb drive? It needs to be extracted first to see the files inside,



and you will find the appropriate files in the,

C:\Users\Richard\Desktop\12-4_vista_win7_32-64_sb\$_OUTDIR\Packages\Drivers

folder. You also shouldn't need them as the native Windows driver will work. I have an Asus motherboard with the exact same AMD 970/950 chipset on it and didn't need any drivers when installing Windows.

One other thing that it could be is if your DVD drive is SATA. For whatever reason if it is a SATA drive and configured as such in the bios, Windows will throw up that message. If it is a SATA drive, figure out which connector it is on on the motherboard and go into the bios and configure that port/connector to IDE mode,