Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Hauppauge pvr 150 conectant drivers 7001 64

30 Aug 2009   #1
thefabe

Windows 7 ultimate 64 bit / XP Home sp3
 
 
Hauppauge pvr 150 conectant drivers 7001 64

I have looked everywhere and can't even find a vista 64 bit driver for this can anyone help? Or can anyone tell me if the AVerMedia AvverTV Bravo Hybred PCI-e tuner is supported or where I can fnd drivers for the same 7100 64 Thanks


My System SpecsSystem Spec
.

31 Aug 2009   #2
whest

XP, Vista, W7 64bit Home Premium
 
 

Your driver Page - WinTV-PVR-150 Support page
If you unzip this package you will probably find in different folders xp and vista drivers - if they wont install because of an os match do the foloowing :

To install a driver OR program in compatibility mode - right click the setup.exe file - click properties - click compatibility - check run in compatibility with vista/xp etc - check run as administrator - leave the rest blank. Start setup.exe and install.

If you cant get the package to unzip the drivers - to install (try if it wont install normally), installing in vista compatibility firstly, than xp - if there are no 64bit drivers it doesnt matter, so long as the 32 bit drivers are cerified they will install on your 64bit

My apologies here I have recently found out that 32 bit drivers wont install on a 64bit OS
http://support.microsoft.com/kb/896454/en-us
My System SpecsSystem Spec
31 Aug 2009   #3
Robearl2x

Win7 Ultimate X64
 
 

The most important info on the support page:

Note: In 64-bit versions of Windows the WinTV-PVR-150 and WinTV-PVR-500 require the use of less than 4GB of memory.

Don't waste your time if you have more than 3GB of ram. It will not work. You will either have to reduce ram or get another TV card. There is no fix available from Hauppauge.
My System SpecsSystem Spec
.


31 Aug 2009   #4
thefabe

Windows 7 ultimate 64 bit / XP Home sp3
 
 

Thanks to both of you I tried everything I could, and could get the program to finaly install with out an error code but when I opened wintv I would get the startup screen then it would freeze the whole system. I have a cheap
AVermedia TV Bravo PCI-E card do here today so I will see if it wil work comments on the egg have said it works with win 7 we'll see. Thanks again
My System SpecsSystem Spec
31 Aug 2009   #5
thefabe

Windows 7 ultimate 64 bit / XP Home sp3
 
 

Well I have 8 gigs of ram. Problem is wouldn't even reconize the card. the programs would install but as yuo know they are not worth a dmn if the card isn't reconized. but thanks anyway.
My System SpecsSystem Spec
30 Sep 2009   #6
criollo

Windows 7
 
 

you need Hauppvr23053 from Hauppauge. Should install in the C:\cabs

Then use the update driver from the malfuctioning icon in Other devices of the device manager(yellow error marked).
Select browse your computer option
Select Let me see manufacturers
Select Have disk
Navigate to C:\cabs\Hauppvr23053\
select HCWPP2.inf
-----
Ignore warning from Win7
----
Works!!
My System SpecsSystem Spec
11 Dec 2009   #7
Win2Kuser

Windows 7 x64
 
 

Unfortunately, that Hauppvr23053 doesn't work in x64 windows 7, it just jumps straight back out after saying that it is not suitable for 64 bit versions

I managed to get a driver from Hauppage support site WinTV-PVR-150 Support page, unfortunately, it doesn't work all the time. Most of the time (after the machine has been shutdown for a while), it will work and all is well, but if the machine is restarted at any time, I get the dreaded device error 10 on startup, then I have to spend the next 20 minutes restarting and cold booting the machine before it will work again

Hauppage were next to useless when I sent them an email, it basically in so many words blamed Microsoft and said to get a newer card!

Guess what, that's exactly what I will do, but one thing for sure, it won't be a hauppage!
My System SpecsSystem Spec
Reply

 Hauppauge pvr 150 conectant drivers 7001 64




Thread Tools





Similar help and support threads
Thread Forum
Event viewer 10005 and 7001
Hello. I've had issues for a couple of days now. I've tried various things and the problem continues to persist. Sometimes a solution I've tried will last me through the day but when I turn it on the next day, it will always freeze after a few minutes or hours of use. A few of the things I've...
BSOD Help and Support
Can't restart, error 7001 prominent in Eventvwr
Don't know why. I get to log on screen and all's well. Then just a lot of black after logging in, the bar on the bottom with the time and... that's it! I had to power off improperly and then start in safe mode w networking to downloaded a tool to collect information after reading up how to submit...
BSOD Help and Support
BSOD caused with a torrents of ID 7001 errors
My notebook has a chronic problem of freezing--BSOD--with or without a message. The most recent event log displays it had BSOD 14 times (all with ID 14 posting) in 7 days. For the same 7 days, it posted 910 errors among which ID 719 covers 719 errors. The notebook is equipped with ATI...
BSOD Help and Support
Event ID 7001 - question before I even post
Good day, I've been experiencing some pretty serious, repeated crashes when booting my unit. Not an orthodox BSOD, just insta-kill, either just before logging on or just after. The system seems to get over it, at least if I reboot into safe mode, but I don't know that I've actually done...
BSOD Help and Support
7001 EVENT SCM on startup
I get the following on every startup: "The NTRU TSS v1.2.1.29 TCS service depends on the TPM Base Services service which failed to start because of the following error: The operation completed successfully" Details: - < Event xmlns ="...
BSOD Help and Support
Service Control Manager Event ID 7001
Not exactly sure what the issue is here But have hundreds of this error.
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App