Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Latest Intel Chipset Device Software

17 Sep 2009   #21

Windows 7 SP1 x64
 
 

Quote   Quote: Originally Posted by moadip View Post
ive downloaded the following drivers
INTEL Chipset Drivers


v9.1.1.1020, 2009-08-26 (All OS including Windows 7)

v9.1.1.1019 Direct Intel Link, 2009-08-18 (All OS including Windows 7)

their unpack the installer starts but it doesnt update any of the files, iv'e got a hp 1199ew and W7pro x64 RTM, i run rhe installer as an admin on my admin account.
WTF is going one?
Updated it to my first post

My System SpecsSystem Spec
.

17 Sep 2009   #22

Windows 7 Professional 64-bit
 
 

the 1020 link is down.
My System SpecsSystem Spec
18 Sep 2009   #23

 
 

My System SpecsSystem Spec
.


18 Sep 2009   #24

Windows 7 Home Premium x64 - Mac OS X 10.6.4 x64
 
 

Hey moad I seen your post about intel not updating all of your drivers...

try this then

Open up a command prompt window where the installer for the chipset is. Hold Shift + right click the folder (or desktop to be much faster) and open command prompt here

Now type the installer name and add one of the following flags...

Quote:
-?
Displays the list of available command line
flags. This flag works in Interactive Mode only.

-A
Extracts all the INF files and Readme to either
"C:\Program Files\Intel\InfInst" or the
<Installation Path> directory specified using
the '-P' flag. The software will NOT install
these INF files to the system. This flag can
be combined only with the '-P' flag. All other
options will be ignored if the '-A' flag is
specified. This flag works in Interactive Mode
only.

-Aonly
Extracts only the INF files necessary for the
current system. If the install has been run once
successfully, '-Aonly' will not return any INFs.
When used in conjunction with '-overall' switch,
all the needed INFs for the system will be
extracted.

-B
Automatically reboots the system after
installation. This flag is ignored if '-A' flag
is specified. This flag works in either Silent
Mode or Interactive Mode.

-f2<path\Logfile>
Specifies an alternate location and name
of the log file created by InstallShield Silent.
This option is used for silent installation from
a CD. 'Path' indicates the directory path where
installation status is logged in file 'Logfile'

-L<LangCode>
Forces the installer user interface to
display the specified language during setup.
Note that there should be NO space between
'-L' and the 4-digit language code (see below).
This flag must be placed at the end of the
command line flag list. This flag works in
Interactive Mode only.

-NOLIC
Does not display the license agreement dialog box during
installation. This parameter works in Interactive
Mode only.

-NOREAD
Does not display the Readme display during installation.
This flag works in Interactive Mode only.

-NOWEL
Does not display the welcome screen during installation.
This flag works in Interactive Mode only.

-OVERALL
Updates ALL INF drivers on all available devices
even if third party drivers are currently installed.
This flag works in Interactive Mode only.

-OVERIDE
Updates the storage drivers even if a third
party storage driver is currently installed.
This flag works in Interactive Mode only.

-OVERSMB
Updates the SMBus drivers even if third party SMBus
drivers are currently installed. This flag works
in Interactive Mode only.

-P<Installation Path>
Specifies the hard disk location to which the
INF program files are copied. If this flag is
not specified at the command line, the
<Installation Path> directory is as follows:

C:\Program Files\Intel\INFInst

If this flag is used without the '-A' option,
only the Readme will be copied to
<Installation Path>. The directory name can
include spaces, but then a pair of double quotes
(") must enclose the directory name. There should
not be any space between the switch '-p' and the
directory name. This flag works in either Silent
Mode or Interactive Mode.

-S
Runs the Installer in Silent Mode (no user
interface is displayed). This flag and the
'-L' flag must be placed at the end of the
command line flag list.

-SKIP<DevID>
Suppresses the installation of one or more
devices.This flag works in either Silent Mode
or Interactive Mode.
In your case you will want to add -OVERALL which will force the system to accept the intel inis

Hope it helps!

ex. C:\Users\<UserName>\Desktop\<Intel Chipset Utility installer> -OVERALL
My System SpecsSystem Spec
18 Sep 2009   #25

Windows 7 SP1 x64
 
 

Quote   Quote: Originally Posted by moadip View Post
404 error

EDIT: reason why its a 404 because it didn0t have a req link before.
You have to d/l it through this link.
Beware that these drivers are not yet officially intel's...
My System SpecsSystem Spec
19 Sep 2009   #26

Windows 7 Ultimate 64Bit
 
 

Hi , i did the overall command.
however , i only have these 2 updated instead.

Intel ICH9R SATA 4 port controller1
Intel ICH9 Family 2 port SATA controller2

hmm , that is all? Kinda weird right , given that overall command.

i'm using a X48 chipset board.
My System SpecsSystem Spec
19 Sep 2009   #27

Windows 7 SP1 x64
 
 

Quote   Quote: Originally Posted by xcluded View Post
Hi , i did the overall command.
however , i only have these 2 updated instead.

Intel ICH9R SATA 4 port controller1
Intel ICH9 Family 2 port SATA controller2

hmm , that is all? Kinda weird right , given that overall command.

i'm using a X48 chipset board.
That is normal(it does it to me too)
I guess that windows has its own up-to-date drivers that do not need replacing...
My System SpecsSystem Spec
19 Sep 2009   #28

Windows 7 Professional 64-bit
 
 

Quote   Quote: Originally Posted by moadip View Post
Is that the 64-bit version?
My System SpecsSystem Spec
19 Sep 2009   #29

Windows 7 Ultimate 32 Bit
 
 

How do I know which version I have.
My System SpecsSystem Spec
19 Sep 2009   #30

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

Quote   Quote: Originally Posted by missaaliyah View Post
How do I know which version I have.

Type Winver in the START search box


Attached Images
 
My System SpecsSystem Spec
Reply

 Latest Intel Chipset Device Software




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:25 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33