Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: drivers not initialising after sleep

23 Sep 2009   #1
mazza

32 bit windows 7
 
 
drivers not initialising after sleep

my drivers often dont initialise after waking my computer from sleep mode, is there anyway to prevent this from happening??


My System SpecsSystem Spec
.

24 Sep 2009   #2
thefabe

Windows 7 ultimate 64 bit / XP Home sp3
 
 

Could you be more specific? What drivers? Which build are you using? 32 or 64 bit? Thanks and welcome to win sevenforums. Fabe
My System SpecsSystem Spec
24 Sep 2009   #3
mazza

32 bit windows 7
 
 

several drivers not neccesarily the same ones each time. the ones that dont work most often is the dvd drivers the webcam and the network drivers (both ethernet and wireless).
i am running 32 bit windows 7.
My System SpecsSystem Spec
.


24 Sep 2009   #4
thefabe

Windows 7 ultimate 64 bit / XP Home sp3
 
 

Would you post a screen shot of device mngr when this happens. I don't know why they would dissapear/ Maybe someone else can help you. One way to prevent it is to disable sleep mode. I have read a few posts where sleep mode has caused some unusual behavior. Welcome to sevenforums. Fabe
My System SpecsSystem Spec
Reply

 drivers not initialising after sleep




Thread Tools





Similar help and support threads
Thread Forum
BSOD - Won't sleep or crashes during sleep on Dell Latitude 6430u
Hi, I have a Dell Latitude 6430u running windows 7 64. When I first got it I worked through many BSOD issues and it was running fine for many many months. Now recently it started not sleeping, waking up by itself during sleep and waking up from sleep with an unexpected crash message. Any and...
BSOD Help and Support
Waking from Sleep understood but wont go back to sleep
I setup 2 Media center PC's and have them both goto sleep when not being used. They wake up in the middle of the night due to mcupdate_scheduled which I understand and know how to turn off. My problem is I want to leave it the option on and have the computers go back to sleep after the update is...
Media Center
System restore hangs on initialising / mouse not working
Hi, I have two problems. It started when my mouse stopped working - wont move the cursor, altho right and left click work. Both wired and wireless, altho the wireless sometimes works if I switch it off then back on again, but not for long. Both types of mouse work on other computers in the house....
Backup and Restore
Downloaded skype setup is not initialising
Hiii everyone... I have downloaded skypeSetupFull.exe completely and saved. But when i try to install it by double clicking it. It is not initialising setup as there comes no setup wisard. How I can run the set up and install.As after double clicking it and clicking on yes to user account control...
Software
GA-EP35-DS3L sleep and KVM switch wakes comp from sleep
Hi All, I have two systems a N650SLI-DS4 and a GA-EP35-DS3L hooked up to a Trednet KVM switch. If I put the GA-EP35-DS3L to sleep and switch to the N650SLI-DS4, the GA-EP35-DS3L system wakes up. The only way I have been able to keep it in sleep is if I hold the switch for the N650SLI-DS4 while...
General Discussion
Converting ext. drive to internal. Tried Initialising, now shows RAW.
I am trying to install my external drive as an internal drive (SATA connection, 3.5") without losing any data that I already have stored. It will not be used as a boot disc, only storage. I've taken 3.5" SATA drive from the enclosure and connected to my system, but can't get it to access the...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App