Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Help with DoubleVibrationSteelingWheel

24 Jan 2011   #21

Windows 8.1 Pro RTM x64
 
 

If you click the Union Jack flag, the site comes up in English.

My System SpecsSystem Spec
.

25 Jan 2011   #22

 

Quote   Quote: Originally Posted by Dwarf View Post
If you click the Union Jack flag, the site comes up in English.
yes but if you chose english language , drivers for windows 7 will not be seen.
drivers are in russian language, made by russians and if you chose english they will dissapear.
My System SpecsSystem Spec
26 Jan 2011   #23

Windows 7 Ultimate x32
 
 

Quote   Quote: Originally Posted by Linuks View Post
Quote   Quote: Originally Posted by Dwarf View Post
If you click the Union Jack flag, the site comes up in English.
yes but if you chose english language , drivers for windows 7 will not be seen.
drivers are in russian language, made by russians and if you chose english they will dissapear.
ok, thanks, i have no problem with russian lang... but..it does not work.... i've tryed all drivers on those page...tryed all usb's, reboot my pc no one time... but my Windows 7 Ultimate dont want to see my controller
My System SpecsSystem Spec
.


26 Jan 2011   #24

Windows 7 Ultimate x32
 
 

Linuks how old is your controller? When do you buy it? may be it because my is rather old... I've bought it in the beginning of 2008?...
My System SpecsSystem Spec
27 Jan 2011   #25

 

guys I want to say that on windows 7 will not work drivers...
I tried it too but doesent work cuz my controller was made in 2008 but drivers for 7 its for controllers made in 2009-2010, my friend have controller made in 2009 and at him works only... but I changed windows and playing in XP)
My System SpecsSystem Spec
27 Jan 2011   #26

Windows 7 ultimate 64 bit / XP Home sp3
 
 

Quote   Quote: Originally Posted by Linuks View Post
I installed the driver from CD that buyed with controller...
XP seems...
I opened the Device manager and find there proprieties of this controller , there says : Windows has stopped this device because it has reported problems. (Code 43)

Name: Unknown Device Type:Universal Serial Bus Controlller
I noticed you haven't filled in all your sytem specs especially which version of seven your using 32 bit or 64 bit. this is very important cause if you installed the XP dirver and didn't use compatibility mode on a 32 bit OS you may only have the generic windows driver installed.
Compatibility Mode

You may also have to trun of automatic driver install for windows before you unistall the device then reboot and re-install the drivers from the cd.
This will only possibly work if your running a 32bit OS.

I can't seem to find the tutorial on how to turn of automatic driver install so here's another way.unplug from the internet>un-install the device in device manager>reboot>go to device manager>update driver software>browse my computer>let me pick>have disk>browse to where the driver cd is and run the setup.exe file.
Fabe
My System SpecsSystem Spec
28 Jan 2011   #27

 

Quote   Quote: Originally Posted by thefabe View Post
Quote   Quote: Originally Posted by Linuks View Post
I installed the driver from CD that buyed with controller...
XP seems...
I opened the Device manager and find there proprieties of this controller , there says : Windows has stopped this device because it has reported problems. (Code 43)

Name: Unknown Device Type:Universal Serial Bus Controlller
I noticed you haven't filled in all your sytem specs especially which version of seven your using 32 bit or 64 bit. this is very important cause if you installed the XP dirver and didn't use compatibility mode on a 32 bit OS you may only have the generic windows driver installed.
Compatibility Mode

You may also have to trun of automatic driver install for windows before you unistall the device then reboot and re-install the drivers from the cd.
This will only possibly work if your running a 32bit OS.

I can't seem to find the tutorial on how to turn of automatic driver install so here's another way.unplug from the internet>un-install the device in device manager>reboot>go to device manager>update driver software>browse my computer>let me pick>have disk>browse to where the driver cd is and run the setup.exe file.
Fabe


I'm using only 32bit OS
That drivers works for XP/Vista/7 x86 / 32bit / for wheels produced in 2009-2010 !
My System SpecsSystem Spec
04 Mar 2011   #28

Windows 7 Ultimate x32
 
 

Quote   Quote: Originally Posted by Linuks View Post
guys I want to say that on windows 7 will not work drivers...
I tried it too but doesent work cuz my controller was made in 2008 but drivers for 7 its for controllers made in 2009-2010, my friend have controller made in 2009 and at him works only... but I changed windows and playing in XP)
all's right! I've the same, i've checked and concluded that my device is too old and have not got up-to-date drivers for Windows 7. So, i find the answer, set up to my PC both Windows XP and Windows 7, it's working perfectly, no problems. And then i'm working i'm loading to Windows 7, but then i want to play games i'm rebooting to Windows XP! ....more than that some games does not work on Windows 7, and in compability mode, but now all is right!
My System SpecsSystem Spec
Reply

 Help with DoubleVibrationSteelingWheel




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:56 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33