Windows 7: Mustec CG-8000T with Win 7

I need to do some portable scanning , Have an old scanner but can't find any driver or info, can I run this on my Win 7 lap ?

Hi anjou2 , Have a look at this driver http://www.mitsdrivers.com/pages_cg-8000t-driver.html There are 2 win 7 drivers in the archive see if they help you

Thanks pebbly, those drivers look the ones. Can't seem to find a connector to use with USB port, the one on the scanner has 8 pins but don't seem to be able to find one. How is that plug defined ?

Hi anjou2, Is it similar to this ? if so you need an 8 pin d sub to usb cable the one in the pic is a 9 pin RS 232

This one is a male round plug about .25 inches with 3 indents on the metal rim. The pins are lined up : 3 at the top, 3 in the middle, 2 at the bottom, all in straight lines.
edit,,,this seems to be MINIDIN-8 (female) Serial, am looking for a USB converter for this, to no avail.

Hi anjou2, like this if so try here ETC Express Console: Revision #34 - Electronic Theatre Controls or if you have a Maplins near you they may be able to help

Yes pebbly, that's the one. Can I now use this with a USB converter or do I need some other entry into the PC.

Hi anjou2, What about this USB Cable for Yaesu FT100 FT817 FT857 FT897D CT62 | eBay will this do for you ?

OK., for future reference, this scanner can't be run from a USB port but needs it's own card (must have been one on an old machine of mine). Thanks any-way for all inputs here.