Windows 7: Belkin usb G f5d7051

Hey,

i updated my pc from vista to windows 7 yesterday, when i had vista my internet work perfectly!! never a problem... but when i installed belkin software off the disk that it came up with, plug your usb in.... so i did, but after a 10min wait, nothing happend. i have uninstalled and tryed again, but no luck.... still the same problem..
any one know any good ideas to get the wireless usb working?
running on windows 7 32bit

Thanks

Hi

Check this out:


http://www.microsoft.com/windows/com...ters&os=32-bit

thanks,,, but still, i cannot get it to work.. thats just telling me that it will work,, but i cant get it to

anyone got any ideas?

Does it work if you hardwire the system into the router?

yes thats how i get on the internet, but i had to move my pc to get to the box, its a netgear box, but never had anyproblems on vista with it... i tryed again, and it said it will actavate the driver one the usb has been pluged in... but it was plugged in?

When the USB is plugged in, you should get a notification that Windows has recognized it. At that point, Windows should try to load a driver, and, if it cannot, it should pop up a message that it cannot find the driver. Is that what is happening?

Also, go into the hardware listing and check to see if there is a yellow triangle next to the USB hub. (Control Panel - Small Icons - System - Advanced System Settings on the left side - Hardware - Device Manager)

No... when i plug it in, it comes up with the sound to say it has been pluged in, but no driver install...if i press scan for hardware changes it does but fails. i went to device manager, it has got the triangle, tryed updateing it but it failed

OK. Right click on the device with the yellow triangle, go to "Update driver", select "Browse my computer for software driver" and there are two choices.

The first is to put in a path to where the driver software is located - find where Belkin loaded the driver (there should be an ".inf" file in there.) The drivers probably are under Program files\Belkin, or some such. See if that works.

If that didn't work, select "Let me pick from a list of device drivers". I just click next at that point, and click "Have disk" and then point it to the CD/DVD drive and put in the driver disk.

not worked.

first of all there is no inf file in /programs/belkin Attachment 1

second of all... i cannot load just the disk it opens what is inside the disk, number 2