Windows 7 - Intel 82852/82855 GM/GME Graphics Controller Driver Issues

**zigzag3143** · 09-02-2009

Quote: Originally Posted by slavanovik

I have Sony VGN-T350p laptop. I tried steps above and none of the seem working for me. If I put older version driver, after rebooting, i get blue screen. Can anybody help please

Slavanovik

We weould know a whole lot more about your hardware if you filled ou the system specs (lower left corner).\

Ken

**slavanovik** · 09-02-2009

Quote: Originally Posted by zigzag3143

Slavanovik

We weould know a whole lot more about your hardware if you filled ou the system specs (lower left corner).\

Ken

I have Sony VGN-T350p laptop. I tried steps above and none of the seem working for me. If I put older version driver, after rebooting, i get blue screen. Can anybody help please

OK. I Updated

**zigzag3143** · 09-02-2009

Quote: Originally Posted by slavanovik

I have Sony VGN-T350p laptop. I tried steps above and none of the seem working for me. If I put older version driver, after rebooting, i get blue screen. Can anybody help please

OK. I Updated

Slav

First could you go into c:\winodws\minidump, zip the dump file (*.dmp) and upload it for us to look at?

Second you compter can gat the driver here Sony eSupport - VGN-T350P - Model Home . Just enter the serial number and it will find the driver for you

Gooe dluck and let us know if you need more help

Ken

**slavanovik** · 09-02-2009

Quote: Originally Posted by zigzag3143

Slav

First could you go into c:\winodws\minidump, zip the dump file (*.dmp) and upload it for us to look at?

Second you compter can gat the driver here Sony eSupport - VGN-T350P - Model Home . Just enter the serial number and it will find the driver for you

Gooe dluck and let us know if you need more help

Ken

Ok. I attached. I tried to go Sony E-support. They have only for XP and it doesnt work with Win 7

**waffle** · 09-03-2009

slav;

I also have a VGN-T350P and got it eventually to work (driver to stick and no more BSOD). Here is the post.
Maybe this helps.

**slavanovik** · 09-03-2009

Thanks everybody. Finally, it works great.

this step helpedme toprevent blue screen and resolled my essue:

1) Follow Arathranar's (post 74) to disable the start up screen which forces a certain resolution and default graphics drivers ("running msconfig and checking Boot->OS boot information. Instead of the animation you now get text showing driver loads and the 0x7E STOP blue screen")

**TheBigMonkey** · 09-03-2009

Quote: Originally Posted by JPC

TheBigMonkey: What version of the driver did you use? I also use a Motion M1300, so it would work for me as well. Thanks!

The driver that I used was the Vista driver for the 82852/82855 that was updated on the Intel site in June. I believe that this is also the driver that is posted on this thread.

Good Luck!

**mynaga** · 09-04-2009

Resolved - At last!

Thanks One and All! I have gotten my system running at full speed again.

Once i add another Gig, this will breath another 12-18 months into the baby.

**pjtaylor** · 09-10-2009

Quote: Originally Posted by TheBigMonkey

Don't know if this will work for everyone but it has worked on my Motion M1300 tablet (Pentium M 1Ghz, 1 Gb RAM).

After trying many (if not all) of the suggested methods I installed the driver as "legacy hardware" in Safe Mode.

This can be done from the general menu in Device Manager < Action.

I have been through several boot cycles without a problem.

Hope this helps.

Just thought I would add that this worked for me also having tried the other methods. This is on a Fujitsu Siemens Amilo L1300.

**JPC** · 09-11-2009

Quote: Originally Posted by TheBigMonkey

Quote: Originally Posted by JPC

TheBigMonkey: What version of the driver did you use? I also use a Motion M1300, so it would work for me as well. Thanks!

The driver that I used was the Vista driver for the 82852/82855 that was updated on the Intel site in June. I believe that this is also the driver that is posted on this thread.

Good Luck!

I couldn't test it until today but... there it goes! My M1300 screen is rotating again and the driver seems stable. No aero though, and 3 different lines appear in the device manager, one of them with a ! sign. Otherwise all perfect.

Thanks Ape!