Intel 82852/82855 GM/GME Graphics Controller Driver Issues  

kensiko said:

This worked for my laptop: http://justendeal.com/driver/855gm_vista_driver.zip

But no chance of making Aero working (even when forcing).

The driver posted by Kensiko installs okay for me in either normal or safe mode, but then shows a code 43 error and reverts back to the standard VGA driver.

I have tried unsuccessfully to disable integrity checks using the command lines posted by Misaki but get an "access is denied' message even when logged in as an administrator.

I would really appreciate any suggestions to get a driver working. I have the release candidate software installed on an HP/Compaq NX500 laptop with a 1.60 Ghz processor and 1.50 GB of Ram.

A. Turn off Digital Driver Signing Check

1. Create a shortcut on the desktop to cmd.exe (In the location box type cmd /k)
2. Right-click on the shortcut and select Run as administrator
3.When the command window opens, type the following and press ENTER after each:
bcdedit /set nointegritychecks ON
bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS
4. Reboot in safe mode (press F8 repeatedly during the BIOS screen).

B. Installing the XDDM Vista Driver posted by Kensiko

1. With computer in safe mode, open the Device Manager
(Start > Computer > System Properties > Device Manager)
2. Initiate driver update for Standard VGA Graphics Adaptor
(Properties > Driver Tab > Update Driver > Update driver -> Browse -> Let me pick -> Display adapters -> Have disk -> give path to "855gm_vista_driver " folder of the extracted driver)
3. Navigate to the folder where the driver is stored then complete the installation.
4. In the Device Manager, initiate a new hardware scan (Action > Scan for Hardware Changes).
5. Reboot. If successful, create a restore point!

Note: Chances are that the above steps did not work first time. Try a few variations & be persistent:
· Re-boot in "Disable driver signing enforcement" mode (a variation of Safe Mode).
· Install the driver against the Video Controller showing an error.
· Try installing the XP driver instead (I ended up doing this only to end up with no Display Driver installed which seemed to help with then installing the Vista driver).

Frustrated said:

A. Turn off Digital Driver Signing Check

1. Create a shortcut on the desktop to cmd.exe (In the location box type cmd /k)
2. Right-click on the shortcut and select Run as administrator
3.When the command window opens, type the following and press ENTER after each:
bcdedit /set nointegritychecks ON
bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS
4. Reboot in safe mode (press F8 repeatedly during the BIOS screen).

B. Installing the XDDM Vista Driver posted by Kensiko

1. With computer in safe mode, open the Device Manager
(Start > Computer > System Properties > Device Manager)
2. Initiate driver update for Standard VGA Graphics Adaptor
(Properties > Driver Tab > Update Driver > Update driver -> Browse -> Let me pick -> Display adapters -> Have disk -> give path to "855gm_vista_driver " folder of the extracted driver)
3. Navigate to the folder where the driver is stored then complete the installation.
4. In the Device Manager, initiate a new hardware scan (Action > Scan for Hardware Changes).
5. Reboot. If successful, create a restore point!

Note: Chances are that the above steps did not work first time. Try a few variations & be persistent:
· Re-boot in "Disable driver signing enforcement" mode (a variation of Safe Mode).
· Install the driver against the Video Controller showing an error.
· Try installing the XP driver instead (I ended up doing this only to end up with no Display Driver installed which seemed to help with then installing the Vista driver).

Dear sir, this worked beautifully with me. One of the notebooks I own is the old Toshiba Satellite A45, now the driver sticks there and works nice. Aero still doesn't work I think because the "Start" circle is all under the task bar (I am not sure I explained right but I know you understand me :) ). Thank you very much.

Hi , i got Fujitsu Siemens with intel 82852/82855 Graphic card , i did try step by step the Frustrated way , but its always finding new hardware and innstaling the drivers and asking for a restart . Any ideas ?

Well, I still have one problem, if I try to play a DVD, I get a BSOD.

I will try the XP driver with the instructions there as posted by misaki: https://www.sevenforums.com/104573-post61.html

Why doesn't it work for mine? After installing the driver using Frustrated's methods, I got a blue screen with error code 43 after the boot screen. I'm using IBM (now Lenovo) ThinkPad T41, Intel Pentium M 1.5GHz with Intel Centrino, RAM 768MB (at least it's what the system properties said - this laptop wasn't originally mine).

I am trying to install Win7 on my Sony VGN-T350P. Overall the installation works very well. However the video adapter (also a 855GM) keeps giving me a hard time. I have spent literally days trying to get it to work properly. I have found and tried all different ways, but none of them has worked thus far. Usually I end up with Win7 reverting back to the Standard VGA driver or even worse a BSOD.

Has anybody found a way to get the native resolution of 1280x768 to work and is kind enough to share how?

TIA!

Best resolution I can get with this "hack" is 1024x768 which might be a feature of Toshiba rather then the capability of the chip. So far everything still works, I can even get the bubbles to float across with the screen saver. I do get BSOD running Windows DVD player, it works OK with other free DVD player I downloaded, although it does "hang" occasionally. Recommend you download all the "hacks" mentioned, install in this sequence....first one mentioned was XP, then there is a "NT" ! someone mentioned which I loaded. Each time I ended up with 1 driver Intel 82855 and Windows native VGA driver. I followed the steps outlined in the above threads, and after the second time the driver took, now my entire driver is 82852/82855. I think the problem is to "hack" out the proprietary addition to the manufacturer's layer on top of the INTEL driver. Once that is gone, it works natively with the INTEL chip only. Toshiba stated I could not run VISTA on this notebook. Not only did I load VISTA on top of Windows XP but I got all my Windows XP stuff to work in VISTA (my Sony Clie for example, which would not work in VISTA). So I am waiting for my Win7 package to come in and I am going to throw it on top of my Win XP and get my Clie to work in Win7, which started this entire rigmarole for me. Basically I think the manufacturers write these proprietary drivers to force you to buy new hardware (just my opinion)

I did exactly as it described in previous posts and all went just fine untill the restarting. Windows crashes after that fancy logo and text Starting Windows.
There is blue screen and it is complaining about the installed driver.

I am using Kensiko's driver and my laptop is Acer Travelmate 4000wnlci with intel chip.

Any idea's what to do next?

I also tried XP-driver, but no help. (Windows 7 keeps using standard VGA)