Windows 7 - DVB-T Intel CE9500 USB Dongle

I am using a DVB-T receiver Intel CE9500 without any problems under XP. With Windows 7 the DVB-stream is interrupted every 2 or 3 seconds for 1 second. I am using DVBviewer, that requires BDA drivers and under Windows 7 I am using the system default MPEG2 decoder.

The driver for Windows 7 was found by Windows Update "Intel CE9500 DVB-T (Enh) Receiver" v 2.1.0.136

Anyone experiencing the same issue? Or any hint?

Tommi

I updated to 7022. DVB-T works now perfectly.

Could you please provide me a link to download this driver. My DVB-T tuner is recognized as CE9500B1 device and Windows 7 is not able to find automatically an appropriate driver. I also couldn't find the mentioned by you driver for download. Thanks in advance!

My DVB-T stick is also recoignized as CE9500B1. The driver for Win 7 32bit is coming through Microsoft update automatically.

Unfortunately there is *no* driver for Win 7 64bit, and I was not able to find one. You can use an older driver for 64 bit, that is not "signed", but you have to start Win 7 in "driver test mode", to accept the unsigned driver, e.g. using dseo13b.

Drivers are here http://www.sendspace.com/file/1xm5pt

Thank you very much for the download link and explanations! It seems that the "old" 64-bit driver works properly I installed it by entering the "using unsigned drivers" mode of the Windows 7 (F8 during the boot). The installed driver still works after entering "normal" Windows mode. So, there was not need to use dseo13b.
Thanks once again!