New
#1
Intel 82801 PCI Bridge - 244E <-- Help
Anyone know where I can find this driver?
Intel 82801 PCI Bridge - 244E
It's the only thing that doesn't have a driver for, thanks.
Intel 82801 PCI Bridge - 244E <-- Help
-
-
New #2
If you fill in your system specs we can be of more help. Thanks
-
-
New #4
Sorry about that, I filled out the info for you.
I tried looking on intel too, couldn't find what I was looking for.
Also, I have a ATA Channel 0 that needs a driver, but I have no clue what it is, could you help me with that too?Last edited by Vendetta; 05 Nov 2009 at 04:19. Reason: Help with another driver
-
New #5
Use the utility to determine your Chipset. Windows vista Os should run ok with our W7.
http://downloadcenter.intel.com/Sear...cation+Utility
Then go back to the previous link and see if your Intel chipset is there.
-
New #6
I installed the software intel recommended after a fresh install of the OS and still no luck.
The only two drivers I need is for the Intel PCI Brdige and ATA Channel 0 (IDE ATA/ATAPI controllers).
Any other suggestions?
-
New #7
What did the utility return when you ran it? does it not give you your chipset details?
http://downloadcenter.intel.com/down...17949&lang=eng
download it, find it and Right-click to Run as Administrator.
-
New #8
This was what I got
Chipset: Intel(R) 945 Express Chipset Family
Memory Controller: 82945G/GZ I/O
Controller: Intel(R) 82801GH I/O controller hub (ICH7DH) SATA Controller found in AHCI mode
I installed updated drivers and everything loaded fine accept the 82801 PCI bridge and the ATA Channel 0 (My DVD Rom Drives?). Both still have Microsfot default drivers.
-
New #9
The drivers that are missing should have been in the chipset driver package you downloaded from Dell. I would suggest downloading them to your desktop and unpacking them if needed. Then go to device manager click on the 1 of the 2 devices doing them 1 at a time and choose update driver>browse>let me pick it>have disk>.Then enter the file location on desktop. Windows should find the driver in the package. and install it.
-
New #10
I'll try to give that a try and thanks for the help. If anything, I am going to do a fresh install again and load the intel stuff first.
Quote
Related Discussions