Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SiS190 100/10 Ethernet device cannot start after installing W7

13 Feb 2015   #11
maxie

windows 7 home 64bit
 
 

Try the Driver in the Link below ....


PCCHIPS Web Site


My System SpecsSystem Spec
.
13 Feb 2015   #12
kamarra

windows 7 64bit
 
 

I hadn't tried the MAC address and it was set to all 0's so changed it, and that sorted the ethernet device cannot start, but still got the controller not installed, so updated from Windows as shown in attachment and still nothing. Yes my network cable in SIS190 ethernet. There is another Ethernet cable slot that doesn't work even in ubuntu connected to my motherboard.


Attached Thumbnails
SiS190 100/10 Ethernet device cannot start after installing W7-update-ethernet-controller.png  
My System SpecsSystem Spec
13 Feb 2015   #13
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

but sis190 is working!!
post screenshot of network centre->adapter settings
Is lan cable cionnected?
command prompt->ipconfig post output
My System SpecsSystem Spec
.

13 Feb 2015   #14
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

right click sis ethernet controler and uninstall driver. Or hasn't it a driver installed yet?
only 1 lan card in machine? or also 1 on board
no wireless?
My System SpecsSystem Spec
13 Feb 2015   #15
kamarra

windows 7 64bit
 
 

I hadn't tried the Mac address and it was set to all 0's so changed it and that got rid of the Ethernet device can not start. tried installed sis Ethernet controller from the updater as in Attachment. Got controller cannot start now.


Attached Thumbnails
SiS190 100/10 Ethernet device cannot start after installing W7-update-ethernet-controller.png   SiS190 100/10 Ethernet device cannot start after installing W7-update-sis-controler.png  
My System SpecsSystem Spec
13 Feb 2015   #16
kamarra

windows 7 64bit
 
 

Will do Maxie, ty

I know Kaktussoft, its strange! It must be because I using ubuntu right now on same PC to access internet. Screenshots coming up.

The controller it didn't have a driver in talled but does now. I unintalled and reinstalled and tried all 3 driver from the update menu.

Yes only 1 card.

No wireless unfortunatly.
My System SpecsSystem Spec
13 Feb 2015   #17
kamarra

windows 7 64bit
 
 

Will do Maxie, ty

I know Kaktussoft, its strange! It must be because I using ubuntu right now on same PC to access internet. Screenshots coming up.

The controller it didn't have a driver installed but does now. I unintalled and reinstalled and tried all 3 driver from the update menu.

Yes only 1 card.

No wireless unfortunatly.

Not sure if this is the adapter settings u wanted, can only find change adapter setting?


Attached Thumbnails
SiS190 100/10 Ethernet device cannot start after installing W7-ipconfig.png  
My System SpecsSystem Spec
13 Feb 2015   #18
kamarra

windows 7 64bit
 
 

Didn't work Maxie
My System SpecsSystem Spec
13 Feb 2015   #19
manish9009

Windows 7, 8.1 Dual boot 64 bit
 
 
Just Install Drivers

Quote   Quote: Originally Posted by Kaktussoft View Post
Did you really try No MAC Address on SiS190 NIC ? Is network cable in SIS190 ethernet?
He just needs Drivers.
Please download and Install them from here.

Download free driver for notebook A32G A32GV11C (Windows 7, XP, Vista) << DriverPack Solution

You might face issues while installing them , if you do change the Compatibility mode to Vista for the installation
My System SpecsSystem Spec
14 Feb 2015   #20
kamarra

windows 7 64bit
 
 

Thanks manish9009, No problems installing That sorted the audio controller But can't find a driver for the offending Ethernet controller Device ID stated. The ones in update menu won't start, also set network address in the controller setting, would I need a different one to the one I set in the Ethernet adapter??


Attached Thumbnails
SiS190 100/10 Ethernet device cannot start after installing W7-startup-3.png  
My System SpecsSystem Spec
Reply

 SiS190 100/10 Ethernet device cannot start after installing W7




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
device that connects to TV that i can stream to via ethernet
i have tv downstairs that is connected to an old Windows media center PC i want to replace this pc with something less bulky and that has the same fucntionality to play movies, music etc from a hard drive either external or via ethernet from another PC, what kind of device can do this? it needs to...
PC Custom Builds and Overclocking
How to connect a ethernet device?
I have a device connected through ethernet. i need to use it through ethernet but have no idea how. In the files of the software of the device is a network.ini file wich shows a adress i can chance. but i have no idea what the adress is i need to set. i can also connect the device over USB and...
Network & Sharing
Ethernet device driver not installing on Windows 7 Ultimate
Hi, I'm not very computer savvy and I've run into a problem while trying to re install Windows 7 on my laptop. I installed the Windows 8 Press Release on my Asus G73SW laptop. After a few days my laptop crashed and blue screened and it required me to re install Windows 7. I bought a Windows 7...
Drivers
How to connect to ethernet device?
I have a RIYA Pro laser controller device. wich connects to the ethernet to receive commands from windows seven. Well my question is, how do i make windows regonise it? In the settings app of the controller(wich is installed on seven) it asks for a IP, submasks ect. But i have noooo idea what i...
Hardware & Devices
This device cannot start (Ethernet driver)
I'm in the process of building a HTPC and am having problems with the ethernet drivers. The drivers weren't automatically installed after a fresh Win7 installation, so I tried installing them off the motherboard drivers disk (EVGA H55V). After driver installation, I get the error message in the...
Drivers
Nforce 680 SLI // No ethernet device
Update to win7 this week, everything works perfect...but no internet. Everything worked perfect under vista64. Got a Nforce 680SLI chipset on a Abit mboard. Lan is turned on in the bios All the drivers via nvidia.com (including the NForce 680 win7_64 drivers as brought by Nvidia as...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App