Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SCSI adapters not supported

06 Nov 2009   #1
rtrippi

Windows Vista Ultimate
 
 
SCSI adapters not supported

Hello,

Prior to purchasing a Vista Ultimate to Windows 7 Ultimate upgrade for $220, I downloaded and ran the compatibility/upgrade adviser program and found no problems.

While running the Windows 7 Install disk, the installation stopped dead with the message that I must update the driver for my Adaptec 29160N SCSI hard disk storage controller. However it could not find a newer driver than the one I am currently using under Vista, version 6.5.645.100, dated 1/31/2007.

What is going on here???






My System SpecsSystem Spec
.
11 Jan 2010   #2
thakanson

Windows 7 Enterprise x64
 
 

According to Adaptec, this card will not work with Windows 7 or Windows Server 2008 R2.
My System SpecsSystem Spec
26 Jun 2012   #3
rengels

Windows 7 Pro 32-bit
 
 

Where is a good place to check and see if the scsi adapter is windows 7-compatible?
My System SpecsSystem Spec
.

26 Jun 2012   #4
HammerHead

win 7 X64 Ultimate SP1
 
 
Horses Mouth

Or the other end if you prefer. Try MS Compatability listings. You may have to search around on this site. I do not see your mentioned hardware. Absence would lead me to believe it is of doubtful useage.

Windows 7 Compatibility for Adaptec 29160N : Drivers, Updates, Downloads
My System SpecsSystem Spec
28 Jun 2012   #5
franzdom

Windows 7 HE 64
 
 

I was able to get an Adaptec 2906 card to work with W7 X64 but I am not using it for boot drives...
If you get windows 7 up and running I am sure you will be able to get that card recognized and working.
My System SpecsSystem Spec
Reply

 SCSI adapters not supported




Thread Tools




Similar help and support threads
Thread Forum
Use old SCSI scanners in Win XP Mode?
I have a couple of old SCSI slide scanners and SCSI cards I use in (real) 32-bit XP, that no 64 bit drivers exist for. So I haven't been able to get them to work in Win7. Is there any hope of getting them to work via Windows XP Mode in Win7? My impression scanning posts here is that this won't...
Virtualization
Microsoft 6 to 4 adapters & ISATAP adapters
Okay, so I recently uninstalled all of my wireless network devices, these were a simple Wireless Card which was in a PCI slot and a wireless USB adapter, I uninstalled them from the device manager, and now under "Network Devices" I have about 32 'Microsoft 6to4 adapters' all with the yellow...
Drivers
SCSI and ATA
Can someone explain why some HDs show as ATA drives and others as SCSI drives in Device Mgr?
Hardware & Devices
scsi problems with 7 64 bit
I have a problem I have a Adaptec 2930-cu SCSI card installed that I want to drive a UMAX Powerlook II and a Kodak 2035 film scanner but the drivers won't install for the SCSI can anybody help and MagicScan 4.5 won't install either. Is there a work around for this or a 64 bit version...
Hardware & Devices
Win 7 64 BSOD SCSI.sys
Win 7 64 BSOD after inserting 4GB memory card from camera. Mini dump shows SCSI.sys +a7d1. Attaching minidump.
BSOD Help and Support
SCSI problem
Hello, I installed W7 but I have a small problem because my reader dvd is not any more acknowledged, nor my second disc, every 2 are there scsi! Thank you for helping me a+
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App