SiS 900-Based PCi Fast Eternet driver to W7  

Hey Friends

Where i found the drivers to SiS 900-Based PCi Fast Eternet driver to Windows seven?

Hi.

You don't.

You gotta right click on it in the device manager. Properties. Details tab. Change the dropdown to hardware ids. Copy and paste the results to here. No screenshot as alternative, please.

Then hope I can find something that will work for you.

Hi torrent

Change the dropdown to hardware IDs? What kind of the sistem information do you need? My Board is an Asus P4S800 AGP - SIS 648 FX - 800 MHz. The Lan driver is a SiS 900-Based PCi Fast Eternet is the single thing that don't work in my PC. Without net access it's impossible update the sistem. It's possible can make the windows 7 work in my computer (with internet access) or it's better forget the mission?

I said the information I need to try to find a driver. I need the hardware id strings. You can follow my last post on how to get them.

You can either write them down and enter here

or

copy and paste them to a notepad. Save to a usb key or something. Then copy and paste here.

Hey Torrent

This is the hardware id string ( SiS 900-Based PCi Fast Eternet )

PCI\VEN_1039&DEV_0900&SUBSYS_80FF1043&REV_91
PCI\VEN_1039&DEV_0900&SUBSYS_80FF1043
PCI\VEN_1039&DEV_0900&CC_020000
PCI\VEN_1039&DEV_0900&CC_0200

Thanks

I found this on Microsoft's Update Catalog but it wasn't for your specific hardware. I modified it so it will install for you. Here's what you have to do:

Download my attachment and extract.

Right click on the network adapter in the device manager. Update driver software. Browse my computer for software. Let me pick from a list. Have disk. Browse. Now navigate to where you extracted to and double click on the .inf. Click ok.

That should work well. Enjoy!

Thanks Torrent

Hello!
I have the same problem, win7 doesn't recognize my sis 900 based ethernet controller.

PCI\VEN_1039&DEV_0900&SUBSYS_09001849&REV_90
PCI\VEN_1039&DEV_0900&SUBSYS_09001849
PCI\VEN_1039&DEV_0900&CC_020000
PCI\VEN_1039&DEV_0900&CC_0200

I've tried to install the .inf but it didn't work. Plz attach the right driver! Thank U very much!
Greetz from Hungary! Zoltan

Hi Gatuxo. Did that work for you? I just noticed it was an x64 driver I uploaded. This attachment here is for x86.

Hi Zolikaa1...

My attachment is for 32-bit x86 that will work well for both of you. Install using the device manager. Enjoy! (Please let me know if this is successful.)

Hi Toorent!

Your yesterday's solution's works fine but thank you for the new file! Now my problem is a driver to readon 9200 series (graphic card on board). The Windows seven only recognaise the VGA option in a resolution tab (800 x 600). Do you have any solution for this problem ?