Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Gigabyte GA-P35-DS3 Raid driver.

03 Feb 2010   #11

Windows 7 Ultimate x64 Service Pack 1 (Build 6.1.7601)

Use the method that I gave you it works.

My System SpecsSystem Spec

 Gigabyte GA-P35-DS3 Raid driver.

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
RAID drivers, Windows 7 and Gigabyte GA-F2A88XM-DS2
Hi, I have 2 30gb SSD drives hanging around and decided to create my new PC using them both in RAID 0. That seems to have worked fine through the Gigabyte utility and shows a 54GB disk on startup. During Windows 7 installation it cannot see any disk. I have downloaded the RAID driver from...
Hardware & Devices
RAID 1 Gigabyte SATA Cannot find the array during Windows 7 install
Hello, I have just bought two brand new WD 500 GB RE4 HDD's and connected them coorectly for RAID 1. I have changed the BIOS and Pressed Ctrl+F to create the RAID and this has been successful. When installing Windows you obviously get to the aprt where you need to load the floppy drivers to...
Hardware & Devices
Win 7 raid 0 setup / missing raid controller driver
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when...
Gigabyte Intel 2 RAID arrays 10 and 1 fail
Dear All, I need help - desperately. I have a 4 * 500GB Seagate drives under a RAID 10 or is it 01 array (mirroring and striping) and this has and continues to work just fine attached to Ports 0 - 3 of the EP45-UD3R Gigabyte motherboard under Intel ICH10R and Windows 7. Volume Write-back...
General Discussion
GIGABYTE raid don't work?
I have connected 2 HD's to the onboard GIGABYTE RAID controller, but in Windows 7 it won't work. In devicemanager it installs it as a "standard IDE-controller", with a yellow triangle on "This device can't start" it says. Don't this RAID controller work in Windows 7, or is it just me that can't...
Hardware & Devices
Can not find drive for Gigabyte Onboard Raid-Controller
Greetings! So I installed the Windows Seven RC x64 today on my desktop machine after having a great experience on my notebook. Most things worked out just fine, but the onboard raid controller is giving me alot of trouble (I got two hard disks connected there, should be raid0?), my mainboard is a...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:49.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App