Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SDA compliant card reader (Ricoh) code 10 cannot start


07 Dec 2009   #1

Windows 7
 
 
SDA compliant card reader (Ricoh) code 10 cannot start

Hi all,

I have a samsung x60 Plus which as of yet has no windows 7 specific drivers but it does have Vista.

The laptop has a ricoh card reader (xd, sd smc) this does work as I have rebooted into XP and it reads and writes fine.

In windows 7 I either end up with the standard SDA driver that Windows 7 installs which reports as working correctly but nothing happens when you enter a memory card OR I get error code 10 cannot start, depending on which set of the various vista and windows 7 drivers I have tried.

So far I have tried;
Generic Ricoh windows 7 card reader drivers
Samsung x60 Vista card drivers and vista chipset drivers
Windows standard drivers

Anyone have any ideas..? Does seem to be a fairly common problem but I have tried quite a few solutions with no luck. Any help greatly appreciated.


My System SpecsSystem Spec
.

08 Dec 2009   #2

Windows 7 ultimate 64 bit / XP Home sp3
 
 

Welcome to seven forums kangarolf: Unfortunately you may need to wait for the manufacture to provide windows seven specific drivers, since you have tried all the others without success. The only other idea I would have is to copy and paste the hardware id string to see if a driver can be located. To do this go to device manager>click on device>properties>details tab>drop down menu>hardware id. Fabe
My System SpecsSystem Spec
08 Dec 2009   #3

Windows 7
 
 

PCI\VEN_1180&DEV_0822&SUBSYS_C023144D&REV_18
PCI\VEN_1180&DEV_0822&SUBSYS_C023144D
PCI\VEN_1180&DEV_0822&CC_080500
PCI\VEN_1180&DEV_0822&CC_0805

Thank you
My System SpecsSystem Spec
.


08 Dec 2009   #4

Windows 7 ultimate 64 bit / XP Home sp3
 
 

You can try this driver RapidShare: 1-CLICK Web hosting - Easy Filehosting Just click on free user wait till time runs out download> unpack and try to install. You may need to use a free RAR unpack program if you don't use RAR. free rar extractor - Google Search
My System SpecsSystem Spec
08 Dec 2009   #5

Windows 7
 
 

I'll try it though I have already tried a number of the generic Ricoh driver packs.

What else could it be...chipset drivers perhaps..? In XP it picks it up straight away and in windows 7 the windows provided standard SDA driver installs ok just no activity when you insert a card. =( Was hoping to use some of my old 4gb SD cards for readyboost.
My System SpecsSystem Spec
08 Jan 2010   #6

Win7 x86/x64
 
 

I have the same problem and already tried a lot of configurations. But same problems as kangarolf described. Perhaps someone can post a solution.
My System SpecsSystem Spec
09 Jan 2010   #7

Windows 7 ultimate 64 bit / XP Home sp3
 
 

Some people have reported that they needed to insert a card before they could install the drivers. Please remember if the drivers are for XP or Vista you'll need to use compatibility mode Compatibility Mode
My System SpecsSystem Spec
10 Jan 2010   #8

Win7 x86/x64
 
 

Thanks for your quick answer. But I have already tried that. I think it is a special Samsung <-> Ricoh Cardreader problem, because other notebook manufacturers seem to have no such errors.
My System SpecsSystem Spec
10 Jan 2010   #9

Windows 7 ultimate 64 bit / XP Home sp3
 
 

fillin your system specs model # and we'll check with Samsung on the reader or post the hardware id string. Thanks. Fabe
My System SpecsSystem Spec
10 Jan 2010   #10

Win7 x86/x64
 
 

Thanks a lot!

Notebook: Samsung X60 (NP-X60CV01/SEG)

SD-Hostadapter:
SDA-Standard konformer SD-Hostcontroller (exclamation mark in device manager):
PCI\VEN_1180&DEV_0822&SUBSYS_C023144D&REV_18
PCI\VEN_1180&DEV_0822&SUBSYS_C023144D
PCI\VEN_1180&DEV_0822&CC_080500
PCI\VEN_1180&DEV_0822&CC_0805

Ricoh R/RL/5C476(II) oder kompatibler CardBus-Controller:
PCI\VEN_1180&DEV_0476&SUBSYS_C023144D&REV_B4
PCI\VEN_1180&DEV_0476&SUBSYS_C023144D
PCI\VEN_1180&DEV_0476&CC_060700
PCI\VEN_1180&DEV_0476&CC_0607

Ricoh Memory Stick Host Controller:
PCI\VEN_1180&DEV_0592&SUBSYS_C023144D&REV_09
PCI\VEN_1180&DEV_0852&CC_088000
PCI\VEN_1180&DEV_0852&CC_0880

Ricoh SD/MMC Host Controller:
PCI\VEN_1180&DEV_0843&SUBSYS_C023144D&REV_00
PCI\VEN_1180&DEV_0852&CC_088000
PCI\VEN_1180&DEV_0852&CC_0880

Ricoh xD-Picture Card Host Controller:
PCI\VEN_1180&DEV_0852&SUBSYS_C023144D&REV_04
PCI\VEN_1180&DEV_0852&CC_088000
PCI\VEN_1180&DEV_0852&CC_0880

EDIT: I've already tried Vista and/or XP drivers and some third party Ricoh driver. I've already managed to get rid of the exclamation mark, but the cardreader didn't work. When I reboot in XP or Vista everything is working fine!
My System SpecsSystem Spec
Reply

 SDA compliant card reader (Ricoh) code 10 cannot start




Thread Tools



Similar help and support threads for2: SDA compliant card reader (Ricoh) code 10 cannot start
Thread Forum
Ricoh 5 in 1 memory card reader not showing drives Hardware & Devices
Ricoh 5 in 1 Card Reader Hardware & Devices
Ricoh card reader Drivers
Ricoh SD/MMC card reader Drivers
Ricoh SD card reader NOT WORKING Drivers

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:55 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33