Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Driver needed for HP Designjet 750c plus plotter

18 Jan 2010   #1
Gtundro1

Windows 7
 
 
Driver needed for HP Designjet 750c plus plotter

Just upgraded to Windows 7 from xp pro.

My HP Designjet 750c plus plotter is not cooperating as the old HP-Gl/2 driver is apparently not compatible with Windows 7. I have read other forums that state that the 1050c plus driver will work but I've tried and still not working.

Any help or advice would be greatly appreciated.


My System SpecsSystem Spec
.

18 Jan 2010   #2
pebbly

win 7 ultimate32bit, Win8.1pro wmc 32bit
 
 

are you using the jetdirect card with your plotter? if you are you need to configure a port for it , use the jetdirect wizzard to do this but im afraid you will have to use in xp or vista compatability mode i had the same problem with my 450c plotter for my cad work this was the only way i could get it to work.
My System SpecsSystem Spec
18 Jan 2010   #3
Gtundro1

Windows 7
 
 

I didn't use a jetdirect card previously when i was running xp and it worked fine just running off of a USB port. It just won't detect any sort of driver. I appreciate the help however.
My System SpecsSystem Spec
.


18 Jan 2010   #4
pebbly

win 7 ultimate32bit, Win8.1pro wmc 32bit
 
 

have you tried loading either the xp or vista driver in compat mode right click on the setup.exe file >properties>compatability>tick run as xp or vista tick run as admin>ok it and exit , then right click on setup.exe and select "run as admin" good luck i hope this helps
My System SpecsSystem Spec
10 Jul 2010   #5
vilmacrazy

Win Xp
 
 

I worked this hp 750c driver for Windows.
My System SpecsSystem Spec
20 Oct 2012   #6
tojoe999

windows 7 64 bit
 
 

Driver pl532en works for HP DesignJet 750C+ on Windows 7 (64 bit)
My System SpecsSystem Spec
21 Oct 2012   #7
tojoe999

windows 7 64 bit
 
 

Driver pl532en works for HP DesignJet 750C+ on Windows 7 (64 bit).

The driver also appears to support:
HP DesignJet ColorPro CAD by HP
HP DesignJet 3500CP by HP
HP DesignJet 3000CP by HP
HP DesignJet 2500CP by HP
HP DesignJet 2000CP by HP
HP DesignJet 750C+ (E/A0) by HP
HP DesignJet 750C+ (D/A1) by HP
HP DesignJet 755CM(C3198B)by HP
HP DesignJet 700 (E/A0) by HP
HP DesignJet 700 (D/A1) by HP
HP DesignJet 488CA (E/A0) by HP
HP DesignJet 488CA (D/A1) by HP
HP DesignJet 455CA (E/A0) by HP
HP DesignJet 455CA (D/A1) by HP
HP DesignJet 450C (E/A0) by HP
HP DesignJet 450C (D/A1) by HP
HP DesignJet 750C (E/A0) by HP
HP DesignJet 750C (D/A1) by HP
HP DesignJet 755CM(C3198A)by HP
HP DesignJet 350C (E/A0) by HP
HP DesignJet 350C (D/A1) by HP
HP DesignJet 330 (E/A0) by HP
HP DesignJet 330 (D/A1) by HP
HP DesignJet 650C(C2859B) by HP
HP DesignJet 650C(C2858B) by HP
HP DesignJet 650C(C2859A) by HP
HP DesignJet 650C(C2858A) by HP
HP DesignJet 600 (E/A0) by HP
HP DesignJet 600 (D/A1) by HP
HP DesignJet 250C (E/A0) by HP
HP DesignJet 250C (D/A1) by HP
HP DesignJet 200 (E/A0) by HP
HP DesignJet 200 (D/A1) by HP
HP DesignJet 220 (E/A0) by HP
HP DesignJet 220 (D/A1) by HP
HP DesignJet 230 (E/A0) by HP
HP DesignJet 230 (D/A1) by HP

My System SpecsSystem Spec
Reply

 Driver needed for HP Designjet 750c plus plotter




Thread Tools





Similar help and support threads
Thread Forum
Won't print to plotter in XP mode
I'm new to the forum and not sure if this is the best thread to post this in. I am running Win 7 Ultimate 64 bit, Virtual PC, XP Mode, and AutoCAD 2000. There are no problems running AutoCAD 2000 in XP mode. My problem is getting my Roland DG flat bed pen plotter to print. It is an RP-22W....
Virtualization
I keep getting "File needed: Printer driver INF ..." No driver found
From a Windows 7, 64bit PC, I am trying to add an HP LaserJet 5100 printer that is connected to another machine on the network. The other machine's OS is XP home 32 bit. I first try adding a printer from Devices and Printers, choosing 'Add a network ... printer', choosing the printer that I want...
Drivers
Setting up an HP DesignJet 750c Plus on Win 7 64-Bit using HP's U.P.D.
Here's my Equipment info: I'M running a Laptop with Windows 7 Ultimate 64-bit OS The Printer is an HP DesignJet 750c Plus plotter. I have downloaded the latest U.P.D.'s, v5.4 for 64-bit Windows 7, from HP. I'm not sure which of the 3 drivers to use. I'm also running an Linksys E2000 Router and...
Hardware & Devices
trouble loading 1st driver needed - Mass Storage Driver
This is what I written down for Gigabyte Tech Zone but I don't want to wait a month or 2 for the reply. I used to have used Vista 64bit before with Hard Drives in Raid0 and I am trying to load Windows 7 64bit with just 1 hard drive. In the Bios I have disabled SATA RAID/AHCI Mode & changed...
Drivers
P5ND2-SLI nforce 4 chipset driver/sm bus driver needed.
Hey guys.. I recently got win/ 32 and love it.. Only problem is that i cant update my SM bus driver. my mother board : P5ND2-SLI nforce 4 intel onboard. ive searched many places and found a previous thread about this. But the link to drivers my device manager wont regonixe.. plz help :)
Drivers
HPGL Driver for plotter
I need an HPGL Driver for a plotter, but please note this is HPGL not HPGL/2, seems the later format is compressed where as mine is a ascii variant, commands like PU; for pen up etc. That seems to be the only thing win7 cant do, is drive my old hp7475a.....
Drivers

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:29.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App