Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Adaptec 2930C SCSI driver needed

19 Jan 2010   #1
Squiggle

Windows 7 (32 bit)
 
 
Adaptec 2930C SCSI driver needed

I have an Adeptec/ Iwill 2930C (not the 2930CU) SCSI card which worked satisfactorily with my previous PC running on XP SP3 (used to feed an Epson GT-7000 scanner). I now wish to install in my new Windows 7 (32 bit) PC, but cannot find a driver (Windows cannot locate a driver and Adaptec have advised that it is not supported). I have seen some reports that suggest that a Vista driver might work - but don't know which one.

Any advice would be welcome. Alternatively, a recommendation for a cheap new SCSI card known to work with Windows 7.


My System SpecsSystem Spec
.
25 Dec 2010   #2
wysiwyg33

Windows 7 Pro 64 bit
 
 

I have a similar problem I have a Adaptec 2930-cu SCSI card installed that I want to drive a UMAX Powerlook II and a Kodak 2035 film scanner but the drivers won't install for the SCSI can anybody help. I previuosly had them working on Win 2000.
My System SpecsSystem Spec
Reply

 Adaptec 2930C SCSI driver needed




Thread Tools




Similar help and support threads
Thread Forum
adaptec AHA-2944UW needed driver
please help me :(,,i need adaptec AHA-2944UW driver for my windows 7 64 bit thanks
Drivers
Adaptec 29160 // 2940 // SCSI connection...
I have an Adaptec 2940AU card from my old 32bit system. I used it to drive a Nikon scanner with a 50pin-50pin connection cable. Now, that card is not supported under W7/64 for my new PC. I have also an Adaptec 29320LPE: External: 68pin VHDCI, Internal 68pin Ultra320 (PCI-e) I have an...
Drivers
Installing Adaptec 29160N SCSI
I am having difficulty installing this card which I wish to use with my Epson GT 7000 (same as Perfection 636S) scanner. Have downloaded the driver u160_w7_ws08r2_x86_drv_b7_5_645_100.exe from Adaptec and unzipped. Windows fails to detect the card automatically. If I then elect to install...
Drivers
Adaptec 29160 driver NOT installed - HOW?
Have installed the win7 beta x64. It is installed on an SATA drive. I have the above controller card controlling other devices that I need. Device mgr shows the drivers for the card NOT installed. When I go to the c:\windows\system32\drivers folder I only see an adaptec ultrawide 320 card listed...
Drivers
HELP! Driver is NOT digitally signed for Adaptec 1430SA
Hi all, please can someone help me..... I am trying to install my Adaptec 1430SA controller card, for use with Win7 64bit, i have been trying for hours ! I have now got as far as windows seeing the right driver for the card, but windows refusing the driver because it is not digitally...
Drivers
Adaptec 29160 SCSI controller
Windows 7 beta seems not to be compatible with this controller. I'm trying to perform an upgrade from Vista Business 32-bit. Setup tells me: The following issues are preventing Windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue. ...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:57.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App