Adaptec 2930C SCSI driver needed  


  1. Squiggle
    Posts : 3
    Windows 7 (32 bit)
       New #1

    Adaptec 2930C SCSI driver needed


    I have an Adeptec/ Iwill 2930C (not the 2930CU) SCSI card which worked satisfactorily with my previous PC running on XP SP3 (used to feed an Epson GT-7000 scanner). I now wish to install in my new Windows 7 (32 bit) PC, but cannot find a driver (Windows cannot locate a driver and Adaptec have advised that it is not supported). I have seen some reports that suggest that a Vista driver might work - but don't know which one.

    Any advice would be welcome. Alternatively, a recommendation for a cheap new SCSI card known to work with Windows 7.
      My Computer
    Quote Quote

  3. wysiwyg33
    Posts : 2
    Windows 7 Pro 64 bit
       New #2

    I have a similar problem I have a Adaptec 2930-cu SCSI card installed that I want to drive a UMAX Powerlook II and a Kodak 2035 film scanner but the drivers won't install for the SCSI can anybody help. I previuosly had them working on Win 2000.
      My Computer
    Quote Quote

 

  Related Discussions
please help me :(,,i need adaptec AHA-2944UW driver for my windows 7 64 bit thanks
I have an Adaptec 2940AU card from my old 32bit system. I used it to drive a Nikon scanner with a 50pin-50pin connection cable. Now, that card is not supported under W7/64 for my new PC. I have also an Adaptec 29320LPE: External: 68pin VHDCI, Internal 68pin Ultra320 (PCI-e) I have an...
I am having difficulty installing this card which I wish to use with my Epson GT 7000 (same as Perfection 636S) scanner. Have downloaded the driver u160_w7_ws08r2_x86_drv_b7_5_645_100.exe from Adaptec and unzipped. Windows fails to detect the card automatically. If I then elect to install...
Have installed the win7 beta x64. It is installed on an SATA drive. I have the above controller card controlling other devices that I need. Device mgr shows the drivers for the card NOT installed. When I go to the c:\windows\system32\drivers folder I only see an adaptec ultrawide 320 card listed...
Windows 7 beta seems not to be compatible with this controller. I'm trying to perform an upgrade from Vista Business 32-bit. Setup tells me: The following issues are preventing Windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue. ...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 00:10.
Find Us