WD 1TB not recognized  

hmmm, does it show that in your dev manager everytime you connect it?

in the policies tab have you got it set to optimized for quick (safe) removal?

maybe try selecting update driver and using windows update to find the driver?

and go into admin tools, computer management, storage, disk management, and try changing its drive letter when its connected.

i use a 16gb micro sd reader and have never had problems on 7057. it could be the controller for the external drive as the convert the sata to a usb interface.

but like you said its strange how its just started it. can you recall the last thing you did with it b4 it started this?

also maybe back everything up on to another system and format the drive?

hope something helps, good luck!

Rick.

I believe it's a 7057 USB/FW drivers issue...

I have a similar problem on 2 of my computers with build 7057, after I upgraded from 7000 to 7057. USB and external devices lost their connection and weren't recognized anymore. I had to manually uninstall the device under device manager, reinstall and submit driver location again.

Doing a clean install of 7057 didn't solve the problem, so since I've used all the leaked builds so far, I have come up with the conclusion that 7057 is the culprit.

I'm installing 7068 on my computers now, I'll let you know if the problem persisted.

Martin said:

Problem solved, I have installed "WD Drive Manager (PC)" , still no luck with firewire, but at least is detected using USB!

good to see you fixed part of the issue, 7057 might have an issue with firewire connections. ive never used 1394 connections myself cos i dont have anything that uses them.

so the way you fixed it was you installed the OEM drivers you got with the drive, or was it from their website?
just make it clear so if others have had issues as well.
did you have to use compatibiliuty mode with anything?

dont forget to select " report post" at the top and ask the forum moderator to mark the thread as 'solved' if you think all is good. it just makes it easier for others if they have a similar problem they can see that you have found a solution to fix it and could work for them.

Rick.

Martin
Where exactly did you find OEM drivers on wdc.com? I have a WD Studio 1TB and a WD Studio II 2TB, both formatted NTFS for use on PC. I couldn't make W7 x64 see either of
them, though they're visible in my XP machine.

When I looked on the WD site, all I could find was a statement that "There are no downloadable USB, Firewire, or eSATA drivers available on our Downloads page. WD external drives use the resident USB and Firewire drivers in Windows 2000 SP4, XP SP2, Vista, and Mac 10.4.8 or higher".

I hunted for solutions on the web, and the one that seems to work for me is to plug the drives directly into the mains - not into an extension bar, not into a 3-way adapter. It's maddening, because I don't have 2 free sockets within reach of my computer, so everything else is stacked up on power bars - but at least I can use the drives.

Mary