New
#1
Bios Settings !
Hello guys !
I have a " little " question,AGAIN .I'm using a Gigabyte GA-P35-DS3L (rev. 2.0 ) motherboard,and a WD SATA II HDD.I was curious witch settings should i change in my bios because my HDD shows up while i'm booting as IDE Channel Master 0...I'll put a mark " * " beside the settings that i'm unsure off if i set properly,so you can guide me and give me a hand.
PS: Sorry if my "curiosity" its a bit long
Integrated Peripherals
SATA AHCI Mode [Disabled] *
SATA Port0-1 Native Mode [Disabled] *
USB Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Enabled]
USB Mouse Support [Enabled]
Legacy USB storage detect [Enabled]
Azalia Codec [Disabled] ß ( Onboard audio )
Onboard H/W LAN [Disabled]
x SMART LAN Press Enter
x Onboard LAN Boot ROM Disabled
Onboard IDE Controller [Enabled] *
Onboard SerialPort 1 [3F8/IRQ4] *
Onboard ParallelPort [378/IRQ7] *
ParallelPort Mode [SPP] *
And another quick curiosity from the Power Management Setup
ACPI Suspend Type [S3 (STR)] *
PME Event Wake Up [Enabled] *
Power On by Ring [Enabled] *
The reason i'm asking this is because i'm planning to update my OS on the secondary PC to win7 x64 ( At the moment using XP SP3 on it),and i want to have the corect settings done.