GBB36X drivers on Gigabyte EP45-UD3P  


  1. nate42nd
    Posts : 2,036
    Windows 7 Professional x64
       New #1

    GBB36X drivers on Gigabyte EP45-UD3P


    I have a Gigabyte GA-EP45-UD3P I'm working on. I have an E-SATA bracket hooked to two ports run by a separate controller for the other SATA ports. I "think" the ports are JMicron controlled, but all it says is "Gigabyte GBB36X" I have the motherboard disk and the driver on it seems to be having some trouble....but I have a "yellow triangle" on one of the controllers. I have Win7 Pro 64 bit on it.
    GBB36X drivers on Gigabyte EP45-UD3P-gbbcontroller.png

    Anybody know if this is a JMicron controller? I can find the latest driver for the "JMB36X" controller...but I just can't find the info. Thanks for any info :)

    I got the "SATA 2" controller driver from the Gigabyte website and it's working, but went from two controllers to one....I suppose it's okay if it's working.
    GBB36X drivers on Gigabyte EP45-UD3P-gbb36x2.png
      My Computer
    Quote Quote

  3. whest
    Posts : 867
    XP, Vista, W7 64bit Home Premium
       New #2

    Its usually noted as having a problem when you have 2 instances of the same device, so I would say you have come to the correct conclusion :).
      My Computer
    Quote Quote

  4. Frostmourne
    Posts : 2,685
    Windows 7 Ultimate x86-64
       New #3

    The SATA update would also work for E-Sata - makes sense.
      My Computer
    Quote Quote

  6. nate42nd
    Posts : 2,036
    Windows 7 Professional x64
    Thread Starter
       New #4

    Looks like it's working great, thanks everybody!
      My Computer
    Quote Quote

 

  Related Discussions
I just received my new Cisco SG200-08 GB Managed Switch yesterday! Requirements were future proofing my network with IPv6, POE, VOIP, VPN,... Actually this thing has too many features... for now! Awesome switch @ $117!!! Newegg.com - Cisco Small Business SLM2008T-NA 10/100/1000Mbps SG200-08 8-Port...
M/B Gigabyte--GA-EP45-UD3P Rev 1
in Hardware & Devices

I want to install MS7 on new h/d.I was thinking of --- Toshiba 2TB Internal Serial ATA III Hard Drive for Desktops --.I will be getting hew desktop in 6-9 months and will use this h/d.The sepc say--2x sata 3gb/s connectors (gsata2_0,gsata2_1) supporting up to 2 sata 3gb/s devices.Would this new...
GA-EP45-UD3P mother board problem
in Hardware & Devices

ok guys i have a GA-EP45-UD3P its a great board when i star the computer there are 6 LED lights (phase LED) on the board that light up as soon as windows boots they turn off is there any type of driver that will make these work in win7 64??
Hi, I just installed windows 7 64bit. I have a sound blaster audigy as installed the latest drivers from creative (SBAX_PCDRV_LB_2_18_0011.exe). I get no sound out of the card at all. Device manager shows the device is working correctly. I have also picked it as the default in the sound...
I have been reading for days and don't understand this. When I get a system built using all SATA drives...is the best setting in the bios AHCI? I know the RAID setting requires drivers and IDE does not but how about AHCI? Should I even use this setting? Does it require drivers or does W7 have...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 15:53.
Find Us