Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: How do I remove MS Intellipoint Optical...


17 Mar 2010   #1

Windows 7 64 bit
 
 
How do I remove MS Intellipoint Optical...

from the Control Panel? I just installed the Logitech driver for the M500 Mouse, rebooted, and it's not showing up in Control Panel. The old one is still there.

Many thanks....

DB

My System SpecsSystem Spec
.

17 Mar 2010   #2

Windows 7 Ultimate Professional x64
 
 

Hello dbrobe,
Welcome to 7 forums!

You need to installation cd that you recieved with your combo. Go to logitch.com and look for the sepoint software. Install thism and you can edit all of your settings there.

Let us know if you need more help,
Ben

Quote   Quote: Originally Posted by dbrode View Post
from the Control Panel? I just installed the Logitech driver for the M500 Mouse, rebooted, and it's not showing up in Control Panel. The old one is still there.

Many thanks....

DB
My System SpecsSystem Spec
18 Mar 2010   #3

Windows 7 64 bit
 
 

Quote   Quote: Originally Posted by Neverhavemoney View Post
Hello dbrobe,
Welcome to 7 forums!

You need to installation cd that you recieved with your combo. Go to logitch.com and look for the sepoint software. Install thism and you can edit all of your settings there.

Let us know if you need more help,
Ben

Quote   Quote: Originally Posted by dbrode View Post
from the Control Panel? I just installed the Logitech driver for the M500 Mouse, rebooted, and it's not showing up in Control Panel. The old one is still there.

Many thanks....

DB
I didn't get a CD with the mouse (didn't get a keyboard with it.) I downloaded and installed the Setpoint software, but the old MS Intellimouse is showing up in Control Panel. I've changed my settings with Setpoint OK - just want the new mouse to show up in CP.

Thanks...
My System SpecsSystem Spec
.


18 Mar 2010   #4

Windows 7 Ultimate Professional x64
 
 

Ok, go into the Device Manager, and disable it.

Let us know if you need help with that,
Ben

Quote   Quote: Originally Posted by dbrode View Post
Quote   Quote: Originally Posted by Neverhavemoney View Post
Hello dbrobe,
Welcome to 7 forums!

You need to installation cd that you recieved with your combo. Go to logitch.com and look for the sepoint software. Install thism and you can edit all of your settings there.

Let us know if you need more help,
Ben

Quote   Quote: Originally Posted by dbrode View Post
from the Control Panel? I just installed the Logitech driver for the M500 Mouse, rebooted, and it's not showing up in Control Panel. The old one is still there.

Many thanks....

DB
I didn't get a CD with the mouse (didn't get a keyboard with it.) I downloaded and installed the Setpoint software, but the old MS Intellimouse is showing up in Control Panel. I've changed my settings with Setpoint OK - just want the new mouse to show up in CP.

Thanks...
My System SpecsSystem Spec
18 Mar 2010   #5

Windows 7 Ultimate Professional x64
 
 

Here is how you do this
  1. Open Device Manager from the Windows 7 Control panel.
    Note:: There are several other ways of opening Device Manager in Windows 7 but it's probably easiest from the Control Panel.
  2. With Device Manager open, locate the device you want to disable.
    Note: Navigate through the categories of hardware devices by clicking the > icon. Specific hardware devices are listed under the major hardware categories.
  3. After finding the device that you want to disable, right click on the hardware's name or icon and choose Properties.
  4. In this Properties window, click the Driver tab.
  5. Click Disable, located near the bottom of the window.
  6. You will prompted with a message that says "Disabling this device will cause it to stop functioning. Do you really want to disable it?"
    Click Yes.
    This piece of hardware is now disabled and Windows 7 will no longer be able to use it.
  7. Click OK.
Let us know if you need any further assistance,
Ben
My System SpecsSystem Spec
Reply

 How do I remove MS Intellipoint Optical...




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:46 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33