Windows 7: Win7(32 bit) driver on Win 7(64 bit)

I recently bought USB TV box (Dany ,U-1050). It is a nice product except that they don’t have its driver for Windows 7 64bit (though they have its drivers forXP, Vista, Windows 7 32bit). Is there any solution other than installing dual boot with Windows 7 32bit? Any help please..

Zeni

try running the driver in compatibility mode Compatibility Mode hope that helps you

Thanks a lot pebbly for your reply. It did help as some applications which were not working properly are running fine. But the driver problem remains there. I ran the installation exe of driver in Vista mode and it installed alright but the windows did not recognize the 'Installed driver' itself. If I know where this driver (or any other driver) is installed, I may be able to set its compatibility mode the window Vista or some thing else. Can you please tell me where these drivers are installed, and do these have some exe files as application to run?

Zeni, have a look in device manager for any red triangles with yellow exclamation marks on them,if so right click on them and "update driver".
Can you tell us a little more info on the drivers and apps that are not working correctly?

In "devices and printers" It indicates USB Tv Box as a device which had no driver installed ( though In have installed the driver) and at update driver command it could not find any driver for the device.

zeni, im dlding the drivers now , will have a look at them and report back

in the drivers folder of the downloaded zip file ,go to the winxp/vista subfolder (or you can use the Windows 7 32bit)in there is a setup.exe file right click on it >properties>compatibility> tick run as vista> tick run as admin> apply and ok> exit , right click on the setup.exe file again and "run as administrator", do the same with the stup.exe files in the applications folder , hope that helps

Your TV box is actually a rebranded Gadmei. I found this out by looking in the driver inf files.
product
Good place to start, there is driver downloads on the support page, find a model that is close and see if there is 64 drivers.

Welcome to Seven Forums. You should have relatively no problem getting your 32bit applications/software to install, they'll just end up in the X86 program file. As for a 32bit driver working on a 64bit OS. this isn't going to work. You'll need to find a 64bit compatible driver.You can right click on the device in device manager>properties> details tab>drop down menu>select hardware id>Copy and Paste the hardware id string and maybe a driver can be found using the id string. Thanks Fabe

Thanks pebbly, I already did just as you said but it didn’t work. Thanks Sanvean for the link, you are right. These are just the same product and same driver, I am very surprised.
Thefabe I did as you said and here is the hardware ID
“USB\VID_1F71&PID_3301&REV_0100
USB\VID_1F71&PID_3301 “
Hope it would be helpful in finding driver. I am waiting anxiously.
Zeni