Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: IEEE 1394 Issues

28 Jun 2010   #21
rickza

windows 7
 
 
Pleeeeeeasssssseeee

Sorry for resurecting the dead threat but I do have same problem. The IEEE 1394 didn't show on device manager. You seem to have the way to fix it but I don't know how to "making room for a PCI-Express IEEE 1394 card". How to do that? Sorry for my bad English.


My System SpecsSystem Spec
.
28 Jun 2010   #22
pebbly

win 7 ultimate32bit, Win8.1pro wmc 32bit
 
 

Quote   Quote: Originally Posted by rickza View Post
Sorry for resurecting the dead threat but I do have same problem. The IEEE 1394 didn't show on device manager. You seem to have the way to fix it but I don't know how to "making room for a PCI-Express IEEE 1394 card". How to do that? Sorry for my bad English.
rickza, the OP meant he used a spare pci-e slot on the motherboard and inserted an off the shelf add in card, hope that helps
My System SpecsSystem Spec
Reply

 IEEE 1394 Issues




Thread Tools




Similar help and support threads
Thread Forum
Setup does not support USB or IEEE 1394 Port
I've been trying to install windows 7 to an external hard drive because one of my computers is effed. It's a 1 TB external hard drive that I've done the following to: Format NTFS, mark partition as active in disk management, created a bootable sector via command prompt and updated mbr, and tried...
Installation & Setup
FireWire (IEEE 1394) Not recognized...
I have a Sony handycam and every time i connect it to the computer with IEEE 1394 i get "USB Device Not Recognized". It's worked before when i had Windows XP, now in the device manager there is nothing that looks like IEEE 1394. The IEEE 1394 is connected directly to motherboard, and its...
Drivers
IEEE 1394 Controller
I have some problem with my firewire driver. It is not recognized (see the picture in the attachment). I tried to add the 1394 OHCI Compliant Host Controller (Legacy), but with no success. Does this mean that my firewire hardware is not compatible with Win 7?
Drivers
VIA 7 Port IEEE-1394 Firewire & USB 2.0 PCI Combo Card
I am having trouble getting the Firewire to work on this card in 7 Ultimate. I tried using legacy drivers and none work. Does anyone have any input? Thanks.
Drivers
IEEE 1394 Firewire Nec (problem IRQ)
Hello My Firewire controller work not correct On firewire use soundcard In Windows Firewire IRQ 14 And Controller Hard drive IRQ 14 Then i lisen music and work Hard drive Sound is crash in milli seconds And sound play next In BIOS i change IRQ on 10 But Windows no changes (IRQ 14) ACPI in...
Drivers
IEEE 1394 Bus Host Controller must be disabled/enabled
I have a Ricoh, but changed it to the Legacy driver. I still have to manually disable / enable it to access my drive. I guess the Windows team figured it would make good use of a persons free time. :p Anyone know how to fix this? If the external is running when I boot, I have to go through...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App