Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: unhandled exception c0000005 at address 006f6330

26 Mar 2012   #1
gameaddict

windows 7 32 bit ultimate
 
 
unhandled exception c0000005 at address 006f6330

I have just installed GTA Vice City on my 32 bit operating system but when i launch it,a black screen appears and then a window opens saying unhandled exception:c0000005 at address:006f6330.Please help me.


My System SpecsSystem Spec
.
26 Mar 2012   #2
zigzag3143

Win 8 Release candidate 8400
 
 


These crashes were caused by memory corruption/exception (cx05) probably a driver.
Please run these two tests to verify your memory and find which driver is causing the problem.


* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.




Memtest.
Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+



Driver verifier

Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
My System SpecsSystem Spec
27 Mar 2012   #3
gameaddict

windows 7 32 bit ultimate
 
 

i used the driver verifier and memtest and there was BSOD error on running driver verifier and it didn't show the driver.plz help me
My System SpecsSystem Spec
.

29 Mar 2012   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by gameaddict View Post
i used the driver verifier and memtest and there was BSOD error on running driver verifier and it didn't show the driver.plz help me

Please upload the new DMP file.
My System SpecsSystem Spec
30 Mar 2012   #5
gameaddict

windows 7 32 bit ultimate
 
 

what is dmp
My System SpecsSystem Spec
30 Mar 2012   #6
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by gameaddict View Post
what is dmp

The DMP (or dump file) is the log of the crash created when you reboot your computer.




We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:
Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:
Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
My System SpecsSystem Spec
01 Apr 2012   #7
gameaddict

windows 7 32 bit ultimate
 
 

these r the dmp files


Attached Files
File Type: zip dmp files.zip (93.2 KB, 23 views)
My System SpecsSystem Spec
01 Apr 2012   #8
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by gameaddict View Post
i used the driver verifier and memtest and there was BSOD error on running driver verifier and it didn't show the driver.plz help me
I am afraid you did not run either verifier or memtest correctly. They are not supposed to tell you what the driver is but will tell us. The new DMP's indicate verifier was not enabled, and how many passes did you run memtest for?

They are still memory exceptions.
My System SpecsSystem Spec
Reply

 unhandled exception c0000005 at address 006f6330




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Unhandled Exception
How can i enable debugging here in this application , the error here is about the value,whenever i try to do something with the application a pop-up comes and it says that for further task you have to change the value and at the bottom it asks to do debugg or do anything else which is completely...
BSOD Help and Support
Unhandled exception
Hi all, I am having a very strange and annoying problem. I see a dialog pop up saying there was an unhandled exception with other information, but before I can read it my PC shuts down. Has anyone seen anything like this? How can I go about figuring out what is wrong and how to fix it? I have...
General Discussion
Unhandled Exception c0000005 at address 006f6330
I have installed GTA Vice city on my PC, But it is not running ,When i start the game black screen appears and nothing happens, i have reinstalled it, before it was showing message that mss32.dll is missing , i replaced it with the new one ,now it showing "Unhandled exception c0000005 at address...
Gaming
UNHANDLED EXCEPTION HELP!
Hi, everytime i launch AutoCAD2010 i get a message box.. "Unhandled Exception Calibri Bold Caps doesnt support underlined" I tried reinstalling the font..but still occurs Help!
Software
Unhandled exception has occured
See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.DivideByZeroException: Attempted to divide by zero. at Iconifier.PackageListBox.OnDrawItem(DrawItemEventArgs e) at...
BSOD Help and Support
Unhandled exception...
"...has occurred in your application. If you click Continue the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately". I'm sure I'm not the first to see this error message. What is the fix here? Thanks.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:53.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App