New
#11
this worked for me! :)
This is how I finally got my original Xbox controller to work with windows 7 after a lot of mucking about which I hope others will also find useful.
First Make sure u uninstall any previous xbcd software and drivers. Also go to Device Manager and uninstall the controller that did not work if u tried to install it previously (it will have yellow exclamation mark next to it)
U also need to turn off ‘User Account Controls’ – Go Start, Control Panel, Action Center, then click on ‘Change User Account Control Settings’ on top left. Drag the Slider all the way down to ‘Never Notify’.
Now U need to download these 3 files:
FILE 1: FilesResidence.com - XBCD_Installer_0.2.7.exe - (xbcd 0. 2.7)
FILE 2: Download Driver Signature Enforcement Overrider 1.3b (Driver Signature Enforcement Overrider 1.3b)
FILE 3: FilesResidence.com - xbcd-amd64.zip - (x64 drivers)
Unzip FILE 1 - xbcd 0.2.7.zip and right click on ‘XBCD_Installer_0.2.7.exe’ note: you MUST ‘Run as Administrator’ or IT WILL NOT WORK!
After that has successfully installed Go to FILE 2 - dseo13b.exe and again right click on it and ‘Run as Administrator’. now u will have several options - Check the box ‘Test Mode’ then ‘Next’ then check ‘Exit’ then ‘Next’.
REBOOT YOUR COMPUTER
When this is done it will show ‘Test Mode’ in bottom right of the screen (note: if yr screen is white then it will not be visible!)
Now you need to extract FILE 3 - xbcd-amd64.zip file
Go the folder u extracted it to and u will have 2 files that u need to move to other folders
(This assumes that you originally installed windows to c: drive) - Right click on XBCD.inf and copy. Browse to the folder c:\windows\inf\ and paste it there.
Go to the other file u extracted - xbcd .sys and again copy it and then browse to folder c:\windows\system32\drivers\ and paste it there.
If u have done all of the above correctly you should now be able to plug yr Xbox controller into the usb and it will recognise it.
If u want to exit ‘Test Mode’ simply run dseo13b.exe and select disable Test Mode, exit and reboot.