Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows Application Freezes

21 Aug 2010   #21
Dzomlija

Windows 7 Ultimate x64
 
 

It would appear you're still having a problem.

At best, random freezing can be difficult to diagnose and solve.

The next time the system freezes, immediately press the RESET button on the computer, and then enter the bios before Windows starts. Go into the "system health" part of the bios (your bios may name it something else, but you get the idea), and report back on the CPU and CASE temperatures.

Also, If you feel comfortable doing so, you might want to turn off the pc and unplug it, then open the case, remove and reseat the memory, or replace the memory entirely temporarily with others.


My System SpecsSystem Spec
.

21 Aug 2010   #22
xknuckles

Windows 7 Ultimate 64Bit
 
 

Its not hardware related cause almost my full pc is upgraded lately like 1 week ago and before that i had problems too. Also the temperatures are fine
My System SpecsSystem Spec
24 Aug 2010   #23
xknuckles

Windows 7 Ultimate 64Bit
 
 

Do u know what solution there is used in SP1?
My System SpecsSystem Spec
.


24 Aug 2010   #24
Dzomlija

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by xknuckles View Post
Its not hardware related cause almost my full pc is upgraded lately like 1 week ago and before that i had problems too. Also the temperatures are fine
Before the upgrade, you had no problems, but after the upgrade, things start freezing.

Certainly sounds to me like a hardware problem, or at least one that is related to the upgrade.

Check to make sure the BIOS is set to default settings. Check that the memory being used is on the motherboards supported memory list.

Question: When you performed the upgrades, did you transplant your old hard drive from the previous hardware configuration, or did you perform a clean reinstall of windows on the new hardware? I know Windows 7 does move from one hardware configuration to another far easier than previous versions of Windows, but maybe there is something left over from the "old installation" that is causing these conflicts which result in the feeze?
My System SpecsSystem Spec
02 Sep 2010   #25
xknuckles

Windows 7 Ultimate 64Bit
 
 

its not hardware related i did new install of windows 7 and i also had the same problems as i did before i upgraded.
My System SpecsSystem Spec
Reply

 Windows Application Freezes




Thread Tools





Similar help and support threads
Thread Forum
cmd.exe application error - application was unable to start correctly
cmd.exe application error - application was unable to start correctly (0x0000142). Click ok to close the application Anyone know why it happened? I got this error when I tried to restart to install an update. However, in windows update, it showed I had nothing to update. There was the little...
General Discussion
Windows freezes after launching any application
So, all started about 2 months ago. My computer kept freezing after launching any application, it was working veeery slow and after a couple of seconds only thing that I could do was shaking cursor, when I tried to open Ctrl-Alt-Delete menu the screen was going black and computer was...
General Discussion
Every application freezes and will not close
Hi, So I started have this problem yesterday, basically every application I open freezes and does not close even from the task manager, however it does let me minimize it. I also noticed my McAfee will not perform a scan, it starts it but always says 0 files scanned. I installed Malwsrebytes...
System Security
Avoiding '<application name> is not a valid Win32 application' error.
OK, this is admittedly a strange one... I have used an old (probably a 16-bit) application as my time synchronizer this I've used for quite some time. Its name is TimeRC, and is a great synchronizer as it tracks moon phases along with the time (from selectable, multiple potential time servers)....
General Discussion
I disabled application info and application update in services.msc
And now I am so screwed. I can't even open services.msc, I can't install an update, I can't run updates and I can't re enable anything because I can't get into services to do it. Please don't say system restore because I disabled it. If you say get a mac, then yes, I agree!:D
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:47.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App