Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: boot1 :error

30 May 2009   #1
Caddish

Windows 7 x64 RC1
 
 
boot1 :error

I played with osx86 on my laptop and later on I wanted to have it back like before so I went to repair in the win7 RC1 DVD wrote:

bootrec /fixmbr
success
bootrec /fixboot
the volume is in a unknown file systeme ... (something like that)

And now when I start my computer I have a nice boot1 :error

So outside win7 repair function what are my option, I have a ubuntu live cd not far and a Hiren bootcd but I have no idea what to do


My System SpecsSystem Spec
.

30 May 2009   #2
Snufffed

 

You might try:
insert DVD make sure bios is set to Boot to DVD.
reboot and follow options to REPAIR.
My System SpecsSystem Spec
30 May 2009   #3
Caddish

Windows 7 x64 RC1
 
 

I have no problem to boot from the DVD the problem is that the DVD does not take my sata driver so it can't write to my partition
My System SpecsSystem Spec
.


30 May 2009   #4
SuperiorBeen

Windows 7 x64 :)
 
 

You need to write a new boot record to point to the win7 volume!
Try this:
  • bcdedit /export C:\BCD_Backup
  • c:
  • cd boot
  • attrib bcd -s -h -r
  • ren c:\boot\bcd bcd.old
  • bootrec /RebuildBcd
Hope this helps!
My System SpecsSystem Spec
30 May 2009   #5
Caddish

Windows 7 x64 RC1
 
 

I'm sure it would solve my issue but in system recovery option my hard-drive is not detected because I can't load my ahci driver. I could load my driver in beta x32 but in 7077 x64 and RC1 x64 I can't and I have thrown away my beta1 CD

Do you know if I could use windows vista 32-bit recovery cd
My System SpecsSystem Spec
30 May 2009   #6
Caddish

Windows 7 x64 RC1
 
 

how hard would it be to rewrite the bcd from scratch with ubuntu live cd
My System SpecsSystem Spec
30 May 2009   #7
Caddish

Windows 7 x64 RC1
 
 

omg it was so stupid I wanna hit myself in gparted my ntfs partition were set to hidden and hfs+ was set to boot so I unhided both ntfs and set the first one to bootable et voila

Now I have to add OSX to win7 bootloader
My System SpecsSystem Spec
Reply

 boot1 :error




Thread Tools





Similar help and support threads
Thread Forum
Burnt out from error error error! Time to go back to Paper.
Hello there. I have been redirected here by jamanji, whom has been most helpful by the way. My PC crashed a little over a week ago. Rather than retype everything, I would like to give you the link to my post. I am not 'Tech' per se, but I would like to try and resolve my problem myself, To...
System Security
Error 41, Error 1001 and error 6008.
Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots. I've updated all my drivers. Tested my memory. Tested my RAM. Run a...
BSOD Help and Support
Error copying file: Data error (cyclic redundancy check). CRC Scan ?
Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks HDDStatus - Tool to check hard disk status, health and reliability Hey, I've been using GoodSync for the...
Backup and Restore
BSOD by ntoskrnl.exe, error d1, error 3b, error 1a
I've just install windows 7 home premium 64bit and got 4 times of BSOD. for the first time error code is 0x0000001a for the 2nd time error code is 0x0000003b for the 3rd time error code is 0x0000003b for the 4th time error code is 0x000000d1 I also attach minidump files and text files that...
BSOD Help and Support
Scan Error Error while Scan::0::LEAD Error: Twain source manager no
hi.... i have promblme , i do not know how to fix it.. i have kodak scnners i1220 plus i have RD Web Access the promblme is.. I have a system based on Oracle has been connted with one scanners( i connected with scanners) When i do a scan shows me this a message (Scan Error Error while...
Hardware & Devices
BSOD error.. Restarts, but power button stays on, graphics card error?
Hey guys, i want to thank you ahead of time for helping me. This BSOD is a pain in the butt. Intel Pentium 2.8GHZ RAM 3.5 32 bit OS Intel GG965 Express Chipset Family I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App