Windows 7 with 16Gb ram


  1. Posts : 3
    windows 7 enterprise
       #1

    Windows 7 with 16Gb ram


    im running Windows 7 Enterprise 64bit. Why do i only see 8Gb as opposed to 16Gb ?

    My motherboard will run up to 16Gb. I have 4 x 4Gb sticks.

    Cheers Mike
      My Computer


  2. Posts : 797
    Windows 7 Ultimate (x64)
       #2

    How much memory do you see in your BIOS?
      My Computer


  3. Posts : 3
    windows 7 enterprise
    Thread Starter
       #3

    bios shows just 8Gb.

    My mobo should support 16Gb. Its an Asus P5Q SE PLUS.

    cheers

    mike
      My Computer


  4. Posts : 8,383
    Windows 10 Pro x64, Arch Linux
       #4

    Reset your BIOS
      My Computer


  5. Posts : 465
    Windows 7 Ultimate x64 and Home Premium x64
       #5

    Also make sure you reseat your ram. Before concerning yourself with Windows not seeing it, always make sure the hardware sees the amount of ram you believe you have in there.

    If the hardware (Bios) does not see what you believe is there, you need to start troubleshooting the memory, starting with reseating the memory first, and if that does not work, check the RAM individually, see if the system identifies each Ram chip.

    If it does, start moving that ram chip into different slots and see if it responds correctly.

    If it does that, put in pairs, first in the first match pair slot, see if it comes up right, then in the next pair slot, see if it comes up right.

    This is a matter of doing trial and error, to see what comes up. Lastly, put them all in and now consider looking at the manual, there may be settings or restrictions based on the type of memory you are using or settings you are missing, but REFER TO THE MANUAL FIRST before messing with those settings.
      My Computer


  6. Posts : 5,795
    Windows 7 Ultimate x64 SP1
       #6

    Is all the memory identical? If so, you could reseat it, and also try 2 sticks...then shut down, try the other two sticks, etc. If the BIOS isn't seeing the memory, there is likely a hardware issue, either bad memory, not seated properly, or a BIOS option/upgrade needed.
      My Computer


  7. Posts : 1,161
    Windows 8.1 PRO
       #7

    DeaconFrost said:
    Is all the memory identical? If so, you could reseat it, and also try 2 sticks...then shut down, try the other two sticks, etc. If the BIOS isn't seeing the memory, there is likely a hardware issue, either bad memory, not seated properly, or a BIOS option/upgrade needed.
    +1

    Look for BIOS upgrades as well.
      My Computer


  8. Posts : 797
    Windows 7 Ultimate (x64)
       #8

    Indeed, if the BIOS does not see your memory, then either the BIOS does not support it - read the manual and try to find a BIOS update - or there is a hardware problem. This can be anything from faulty DIMMs to wrongly inserted DIMMs. Matched pairs should be seated accordingly, to do this you need to consult the PC manual. To give you an example, in my Inspiron 530 there are 4 memory slots, ingeniously tagged as 1, 2, 3, 4. However, if I use only one DIMM, it has to be inserted in slot 1. If I use a pair of matched (dual channel) DIMMs, then they should be put in slots 1 and 3. This means, if I put them in slots 1 and 2, the system may not work properly. So, my advice is, follow all the excellent suggestion above, but consult your manual first on how exactly the memory should be inserted in your motherboard.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 16:23.
Find Us