Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Screen Capture doesn't seem to work

17 Feb 2011   #1
dgudgel

windows home premium 32bit
 
 
Screen Capture doesn't seem to work

I followed the instructions in help but clipboard did not copy the screen. With or without pushing the alt key. It still had my last copy of a link address. While we are at it where do I go to get rid of the big bar across the bottom of my new 24 in whooperdooper back lit led display that makes it to about a 17 inch display. None of the tool bars are activated. Have a nice day.


My System SpecsSystem Spec
.

17 Feb 2011   #2
Brink
Microsoft MVP

64-bit Windows 10 build 10074
 
 

Hello Dgudgel,

See if this may be able to help.

Screenshot with Paint

and

Screenshot and Upload using MWSnap

Hope this helps,
Shawn
My System SpecsSystem Spec
17 Feb 2011   #3
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 SP1, Home Premium, 64-bit
 
 

I assume you are trying to paste your screen capture into a photo editing program so you can save it as a jpg image?

I've seen situations where I had to shut down the editor BEFORE I hit the print screen key and then reopen it AFTER I hit the key. If I just left it open, I could only paste in an earlier print screen, rather than a new one.

Regarding your display:

What resolution are you currently using?

What other resolutions are available when you right click the screen, choose "personalize" and then "display" from the lower left?

What is the "native resolution" of your monitor?

It sounds like you may be using a 16:9 type resolution ("widescreen") when you really need a conventional 4:3 non-widescreen resolution.
My System SpecsSystem Spec
.


17 Feb 2011   #4
dgudgel

windows home premium 32bit
 
 
screen appearance and print screen performance

These are task or tool bars taking up the space. If I could get the print screen to work I could show you. This is not blank space. Just tool bar or task bars taking up space on the screen. I may go to the snipping tool. It worked last time I tried it. But if there is a problem with print screen I'd like to fix it. I haven't tried all the options suggested in the previous post. I have gone to one screen on the laptop to simplify thing

As far as print screen yes I am trying to paste it in either paint or corel photohouse. I have to complete the suggestions before I am finished checking it out. I've never had problems before using print screen in other MS operating systems

Later
My System SpecsSystem Spec
17 Feb 2011   #5
kenC

Windows 7 Home Premium X64 SP1
 
 

If you right click the Taskbar and choose 'Properties' you get options to use small icons or to auto-hide the Taskbar or to move it to the top or side of the screen.
My System SpecsSystem Spec
17 Feb 2011   #6
Ztruker

Windows 8 Core X64
 
 

Brink, do you have a tutorial that uses the Win 7 Snipping tool? If not, it would be handy to have. Doesn't make much sense to download MWSnap when the Snipping Tool is already available in Win 7.

Is there a Template for creating help files here? If you don't want to do this I might take a shot at it if I had a template to work from.
My System SpecsSystem Spec
17 Feb 2011   #7
Brink
Microsoft MVP

64-bit Windows 10 build 10074
 
 

Hello Rich,

We have this that may help with the Snipping Tool.

A Preferred Method of Uploading/Posting Screen Shots

and

How to use the Snipping Tool in Vista - Vista Forums
My System SpecsSystem Spec
17 Feb 2011   #8
dgudgel

windows home premium 32bit
 
 

OK I giver up. It didn't work, then I got print screen working without the big monitor, Now it doesn't work again
then snip worked then not. Best I go elsewhere for a while then come back another time if necessary. The last time I did a paste it had the old capture and not the new copy. Have a nice day
Later Thanks for trying to help.
DG
My System SpecsSystem Spec
18 Feb 2011   #9
Imperfect1

 
 

Some computers require that you hit the 'fn' key with the Print Screen key. Why don't you try that?
My System SpecsSystem Spec
18 Feb 2011   #10
dgudgel

windows home premium 32bit
 
 
fn key worked

I had erratic results. Sometime pr scr worked then not. However I need more testing to see what happens when I hit the fn key also as the first time it only copied part of the screen. The next time I highlighted the screen and the entire article was pasted but I don't know if it was jpg or just text. You'd think just hit pr scr and then past it somewhere. Fortunately there are other methods to get results too. Have a nice day.

Doyal
My System SpecsSystem Spec
Reply

 Screen Capture doesn't seem to work




Thread Tools





Similar help and support threads
Thread Forum
My screen saver doesn't work!
Hi, can anyone advise me? Since I downloaded Windows 7 Professional my screen saver doesn't work! I have put in 'Photos' and it works when I preview in Control Panel, so I 'apply' and 'ok' but then nothing happens! What can I do? :cry:
Customization
Laptop Screen doesn't work, No Backlight
Merry Christmas Team. My little brother came home from work one night and now is screen doesn't work at all. no flickering, backlight etc. I connected it top the TV via HDMI and even that didn't show up anything. How high are the chances that his graphics card has died? Cheers Gameover.
Hardware & Devices
HELP: power option doesn't work - screen saver doesn't start!
I have an ASUS notebook running windows 7 64-bit. I am using the QuietOffice power profile, however the screensaver won't kick in no matter what I do, and the display does not turn off even though I set it to be after 5-minutes of inactivity. I don't know if there is something running in the...
General Discussion
Window 7 screen saver doesn't work
I have tried everything , I tried bubbles screensaver set time to come on 1 min bubbles starts but after a few minutes the screensaver goes blank or black screen even if I use the windows media center screensaver n turn off the other screensaver off still please help since I want to use my pictures...
General Discussion
Split screen - it doesn't seem to work on the left?
I am trying out the split screen function - I move my web browser to the RIGHT side and it splits it half the screen - but when I move another web brower or notepad or anything to the LEFT hand side, it doesn't do anything. It just stays where it is. Any ideas?
General Discussion
Touch Screen doesn't work out of sleep
Hi Guys...I'm using the Lenovo multi touch driver for my X61T. With Windows 7 build 7000 the same driver when I wake my laptop from sleep the touch screen works. Starting with build 704x (i can't remember the exact build but it was the first leaked x64 build) when I wake the machine from sleep the...
Drivers

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App