Windows 7: How Can You Mend A Dead Pixel's Heart?

Hello. I'm just trying to get a definitive answer to my problem. I have a black spot on my taskbar and from my search here on SF and Googling, the difference between a stuck pixel and a dead one is that a stuck pixel will be white or a colour while a dead pixel will be black. This leads me to my conclusion that what I have is a dead pixel (my warranty ran out about 2 weeks ago so the timing seems right).

The majority of opinions is that there is no fix for a dead pixel. When I Google, however, there are 2 or 3 hits that claim there is a fix. Frankly, I am doubtful about these claims, but I would like to get the opinion of some of the people here at SF as I trust the knowledge of the people here the most.

So, to sum up, am I correct about the dead pixel and is there a fix?

Thank You, David

On an LCD/LED/TFT screen, each pixel (or, rather, group of 3 sub-pixels since each pixel is actually comprised of a red, green, and blue element) is controlled by a transistor array. If we think of these transistors as switches, when they are open the appropriate sub-pixel is turned off and no light is admitted through. Conversely, when they are closed, the appropriate sub-pixel is turned on and light is allowed through, the colour of which is determined by the sub-pixel.

We use the terms dead pixel to refer to a pixel that is completely dead and shows no colour whatsoever, whereas a stuck pixel means that at least 1 of the 3 sub-pixels in that pixel group is permanently turned on (the others may, or may not, operate as normal). In both cases, the root cause is the same, this being a dead transistor or transistors (they can fail either open or short circuit).

Unfortunately, it is not generally possible to reactivate these transistors, once dead they stay dead. Some people say that by gently rubbing in the area of the dead/stuck pixel, it is possible to bring it back to life, whereas others maintain that by rapidly cycling the pixels surrounding the problematic one it is also possible to revive it. This may or may not work, and there is no guarantee either way.

Thank You Dwarf.
David

You're welcome, David.

Some more information can be found here: ISO 13406-2 - Wikipedia, the free encyclopedia

Interestingly enough, I already read this article during my Google search, but Thanks again Dwarf.
David

Why not call in about your warranty anyway? Some companies have helped me out if the warranty had just expired. However, many LCD brands wouldn't do a replacement for just one dead/stuck pixel. I've seen the number has high as 7 before a replacement is issued, but each vendor has their own policy. I'd still call, just in case. The worst that will happen is you are told they can't do anything.

I am assuming because, like the wiki article states, most manufactures since 2007 declare their products as Pixel Fault Class Level II. Having 7 dead pixels would make it a level 3. Potentialy causing a lawsuit of false advertisement if the product is not fix regardless of warranty. It's like buying a TV that states 3HDMI outputs and only gives you 2. A level 2 is a level 2 regardless of time. Reputation most likely also plays a role.

Correct me if I am wrong.

The quote below dose not disagree with what was posted above but adds some more interesting information that may or may not have been on the Wiki site.

Dead Pixel?

Pixel Massage:

JScreenFix - What is a pixel massage?

You can try many little softs like "UDPixel", "Dead Pixel Fixer", "Stuck Pixel Fixer"....